Carver TFM-15cb Binding Post snapped

[Megaladoink]

I had a person ship a TFM-15cb poorly and one of the speaker binding posts snapped off. I really just need one but I may need the entire assembly.

I tried Bob Carver directly through the website but no reply.

Thanks, Chris

 

[bowtie427ss]

I had a person ship a TFM-15cb poorly and one of the speaker binding posts snapped off. I really just need one but I may need the entire assembly.

I tried Bob Carver directly through the website but no reply.

Thanks, Chris

I'd recommend posting a thread polling the community for a source for the correct original style binding posts. Folks who have worked on these amps will know, and there are no doubt at least a few of those folks around here.

They can likely point you to a source that is also a site sponsor(Parts Express for example), everybody wins.

Worst case, you may have to replace the row of four to keep them all matching in exact style/cosmetics.

 

[Megaladoink]

I'd recommend posting a thread polling the community for a source for the correct original style binding posts. Folks who have worked on these amps will know, and there are no doubt at least a few of those folks around here.

They can likely point you to a source that is also a site sponsor(Parts Express for example), everybody wins.

Worst case, you may have to replace the row of four to keep them all matching in exact style/cosmetics.

I just tried to post a Want to Buy ad and it was deleted because I'm not a paying member.

 

[goodolpg]

They don't appear (to me) to be anything proprietary or special. The collar closest to the back panel might be essential, or not. A kludge might be a possibility if only for spacing purposes.
Partsexpress or other parts stores might have what you need. Try 5 way binding posts or speaker terminals.