Celestion Ditton 25 crossover

[bellamp]

Celestion Ditton 25 crossover

I have a fried inductor on one crossover board. Most schematics I see show all inductors as "1H" which I think is impossible. The fried one is just next to the 24uf cap, anyone know real values for this inductor? Thanks in advance.

 

[montrecott]

There is a Celestion Owners thread under "British Audio." You may want to post there.

 

[homebrew]

Is this the schematic of your crossover?

 

[bellamp]

That's one schematic I've found, but my understanding of inductance is that 1 Henry is impossibly large. There is another schematic with values of 2.4 mh and .55 mh that would seem to make more sense, but ???

 

[bellamp]

Found this -https://images.app.goo.gl/7EA37HEVHCsxH9hr6

Only inductor that comes close on Parts Express website is Jantzen Audio part #000-1088 2.5mh 18 ga. Is this close enough to sub for the 2.4mh? I notice the original has much finer wire than 18 ga - as I know very little about inductors does wire gauge matter?

 

[bellamp]

Well, thanks to all for your help.
What we have found apart from crossover problems is multiple driver problems - both mids are toast & 3 of 4 tweeters are dead.
The owner has decided to bin them, which seems a shame. So what we have left is 2 woofers, 2 passive radiators & 1 tweeter - plus 2 pre pc crossover boards that need $1 caps & an inductor (for the woofer).

Anybody need these parts for their resto? Available cheap plus cost of shipping. Hate to see them go to waste...
We are in Quebec, Canada.