Custom McIntosh case

[Jbmorrey]

i recently made a case for my McIntosh mx112, but wanted to know if the panloc for the L12 case (which I believe is the panloc and case for the MX112 could be added to a custom made case? Would this be a simple addition to an already made case? Thanks so much any advise is appreciated.

James

 

[Logan_Nolag]

I don't see why not. I believe the panloc components even came with a pattern so you could install the brackets in a custom cabinet. You can take a look at this PDF which does a pretty good job of explaining how panloc worked: http://mcintoshcompendium.com/Compendium Docs/Other/PDFs/PANLOC.pdf

 

[Jbmorrey]

Great, thanks so much, I appreciate the link to the PDF, I just wanted to make sure I wasn’t getting into something that requires a bunch of custom work.

James

 

[VintageMac]

The Panloc brackets came with the electronic units. The McIntosh cabinet came with mounting hardware to which you attached the brackets. It was a small "L" shaped bracket nearly the height of the cabinet opening and threaded for the mounting screws. You will need to find or fashion these brackets:

The units also came with this hardware packet for installing the Panlocs into a flat panel:

Larry