Decware SEWE300B "Zen Sarah Amplifier" 300B
- Thread starter CohibaJoe
- Start date
They're just teasing you now
We have an update to the room build, just waiting for the cabinet doors. Power and Speaker cables are conditioning with speaker cables using FryBaby3 Burn-In Generator. Just started for a 2-week tour on the Power cables and Speaker cables for 2 days on Voltage then 4 days on Current Mode. For Burn-in on the Sarah (after the room is done and cables are burned-in.), I will be using the stock Decware tubes (which are very good with Red tip tubes) for 300+ hrs. Then later on I will tube roll the 300B's and 12AU7.
albusark
Dynaco Fan
FryBaby3 - Compact Burn-In Generator
The FryBaby3 audio system conditioner is a burn-in signal generator designed especially for cables and interconnects. It can also be used to burn-in linestages, phonostages, and amplifiers. The sophisticated electronic waveform, a combination of wideband noise and variable frequency amplitude...
hagerman-audio-labs.myshopify.com
For $299, one would reasonably expect independent evidence such as:
- before-and-after impedance or dielectric measurements,
- controlled ABX listening tests,
- repeatable laboratory data demonstrating changes consistent with the claimed sonic improvements.
The good news is your Decware amplifier is gorgeous, looking forward to hearing about your experience with it.
Very simple on A/B testing the FryBaby3, a set of brand-new cables (which I will leave a pair without cooking) and a pair cooked. Then invite the Suncoast Audiophile Society group to A/B test.FryBaby3 - Compact Burn-In Generator
The FryBaby3 audio system conditioner is a burn-in signal generator designed especially for cables and interconnects. It can also be used to burn-in linestages, phonostages, and amplifiers. The sophisticated electronic waveform, a combination of wideband noise and variable frequency amplitude...
For $299, one would reasonably expect independent evidence such as:
- before-and-after impedance or dielectric measurements,
- controlled ABX listening tests,
- repeatable laboratory data demonstrating changes consistent with the claimed sonic improvements.
The good news is your Decware amplifier is gorgeous, looking forward to hearing about your experience with it.
We are still burning-in the Power and Speaker cables and will be ready this Saturday to start putting the gear together. The 2 media centers are done, and we are putting together the storage bins for the pull-out shelves. I would like to be 70% completed by Sunday
I also have ordered Shunyata Venom V16 PD for the main gear and will use the Furman Elite-15 PF (upgraded with Pangea Audio Premier SE AC Outlets) for the TV and a few audio devices.
I also have ordered Shunyata Venom V16 PD for the main gear and will use the Furman Elite-15 PF (upgraded with Pangea Audio Premier SE AC Outlets) for the TV and a few audio devices.
albusark
Dynaco Fan
This is why vintage amplifiers sound so good, all the wires have burned in completelyWe are still burning-in the Power and Speaker cables and will be ready this Saturday to start putting the gear together. The 2 media centers are done, and we are putting together the storage bins for the pull-out shelves. I would like to be 70% completed by Sunday
I also have ordered Shunyata Venom V16 PD for the main gear and will use the Furman Elite-15 PF (upgraded with Pangea Audio Premier SE AC Outlets) for the TV and a few audio devices.
Room Update, waiting on MORE RCA cables, I decided to be consisted with RCA, XLR brands which I will be using Blue Jeans LC-2, WBC-PRO-LOCAP and Belden 8402.
The two FryBaby 3's have been working no-stop (for those Flat Earthers, I have left a set of speaker cables and RCA's to test later).
The two FryBaby 3's have been working no-stop (for those Flat Earthers, I have left a set of speaker cables and RCA's to test later).
Looking forward to the results of your experiment.