• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

DIY amp kit

Heddarn

New Member
I want to build my own amp for my home-cinema but i dont have much exeprience on building amps so im currently looking for amp kits.

My speakers are quite high end and requires alot of grunt. "http://www.echoloft.com/articles/june2000/wisma.htm" The silvery ones.
Since i only have the Yamaha PC2602M and thatś a bit too weak.
Using a Rotel DVD and a Rotel receiver.
A amp with the same sound quality as the yamaha but alot more grunt shuld suit me well.

Is there any kits avaliable with that high specs?
 
Register to hide this ad
I want to build my own amp for my home-cinema but i dont have much exeprience on building amps so im currently looking for amp kits.

My speakers are quite high end and requires alot of grunt. "http://www.echoloft.com/articles/june2000/wisma.htm" The silvery ones.
Since i only have the Yamaha PC2602M and thatś a bit too weak.
Using a Rotel DVD and a Rotel receiver.
A amp with the same sound quality as the yamaha but alot more grunt shuld suit me well.

Is there any kits avaliable with that high specs?

I hate to say it, but I've never heard of your "high end" speakers before. I've also heard a number of speakers that used Scanspeak drivers that didn't sound all that great.

As for an amp with "high specs" I'm not sure what you mean, as a lot of specs aren't real meaningful. Do a Google search for audio amplifier kits and you can see what's available that you may want.

Best Regards,
TerryO
 
A amp with the same sound quality as the yamaha but alot more grunt shuld suit me well.
The Yamaha is rated at 260WPC. If that's not enough 'grunt' for you, you're going to have a real problem finding something that will make you happy...especially if you want to try and build your own. A kit for an amp of 400+WPC is a pretty rare thing, and may cost as much or more than simply buying one (kits are for learning, not for building something cheaper than you could buy it, as the vast majority of kit builders will tell you).

Head over to www.diyaudio.com and post your request for info there. You'll probably hear something similar to what I just said, but someone may know of a kit that fits your power requirements.
 
You're going to look long and hard to find a DIY amp kit that puts out more than 250w./ch., especially a multi-channel amp.
This sort of begs the question, "what is the efficiency of the speakers?". Any links to Avance Intl. or Avance loudspeakers are broken. Is this company no longer in business? If you can post the efficiency of the speakers, more directed advice may be forthcoming.

Edit: Posted at the same time as EW with pretty much the same thoughts.
 
You're going to look long and hard to find a DIY amp kit that puts out more than 250w./ch., especially a multi-channel amp.
This sort of begs the question, "what is the efficiency of the speakers?". Any links to Avance Intl. or Avance loudspeakers are broken. Is this company no longer in business? If you can post the efficiency of the speakers, more directed advice may be forthcoming.

Edit: Posted at the same time as EW with pretty much the same thoughts.

You might want to copy the latest iteration of the "Blame" amp by DestroyerX over on Diyaudio.com......the group buy for the boards is over, but someone may have an extra set....I have a set but intend on using them. The latest version should do it for sure.

Russellc
 
I hate to say it, but I've never heard of your "high end" speakers before. I've also heard a number of speakers that used Scanspeak drivers that didn't sound all that great.

As for an amp with "high specs" I'm not sure what you mean, as a lot of specs aren't real meaningful. Do a Google search for audio amplifier kits and you can see what's available that you may want.

Best Regards,
TerryO

I hate to say this, but TerryO has never heard of your speakers. Bummer.
 
The speakers are not something you'd see in the US, but they don't look to be any sort of joke. Okay, the beam blockers are a little troubling... http://www.avance-audio.net/products_show.asp?id=314

Anyway, 91dB 4Ω speakers with a burly pro amp rated (at 4Ω) for a 400W continuous sine wave at <0.05% THD, full bandwidth? You do NOT need more amp. If you're looking for more authoritative bass, you either need different speakers, subs, or EQ. If you're looking for more max volume, those speakers don't have any more in them.
 
Since I know nothing about your speakers and you evidently like the "sound" of your Yamaha amplifier, you may want to investigate if it would be easier to just buy another Yamaha amp and bi-amp your speakers. If the speakers already have two sets of input terminals (connected by some sort of jumper), it should be very easy to do.

Best Regards,
TerryO
 
Since I know nothing about your speakers and you evidently like the "sound" of your Yamaha amplifier, you may want to investigate if it would be easier to just buy another Yamaha amp and bi-amp your speakers. If the speakers already have two sets of input terminals (connected by some sort of jumper), it should be very easy to do.

Best Regards,
TerryO

+1 Some amp facts will help you understand a bit more of what's actually going on with your system and why we are all telling you that simply more powerful amps won't do it for you. We hear things logarithmically, but power requirements are linear arithmetically. What this means is that to get a small increase of perceived volume you must increase the volume by about 3 dB. That is generally considered the smallest volume change we can perceive. Unfortunately for our bank accounts this amounts to a doubling of the power requirements. So, going from 250 or 260 watts all the way up to 500 watts per channel will will get you only a small perceptible increase in volume. (And 500 watt per channel amp kits are none too common) In order to get more authority, better bass output, louder volume etc, you will need to get drastic. The best way to do that is to get another amp of equal or more power, get an electronic crossover and biamp your speakers, using 250 to 400 watts per channel for the bass and the existing 250 for the midrange/treble.

This link does have some high powered amp kits available but you need to put together the amp kit, identify and purchase a power supply kit, then hut down a suitable enclosure and all the axillary gear that makes these things go. It's not a high mountain to climb but for beginners (if indeed you are a beginner) it can be a little daunting with at least a few "oops I forgot I needed ...." moments.

http://hifimediy.com/?wpsc_product_category=amplifiers

Whatever you decide to do - good luck to you.

Shelly_D
 
I'm surprised that you need more power than the PC2602 can give (I also have one).

I'm also of the view, based upon quite a bit of experimentation, that passive biamping is a WOFTAM and will likely not give any more clean level, as the same input signal is still going into both amps, and present at the output terminals.

Kits for high power amps are rare as others have stated but Aussie Amps have some that are well regarded by what I've read online. As they come as assembled modules, there is far less risk for a new constructor in getting it right. Modubiz in Italy have some cases that would suit.

In the first instance borrowing or hiring a P7000S for a few days would give you a better idea on whether it's 1100W/4R is enough. These are also very good amps (I have 2) and if you want to get finicky, and void the warranty, the analogue input stages can be completely bypassed easily going directly into the amplifier. I've not done it with mine as they are destined for subs.

I also bet that 91dB is actually at 2.83V so really about 88dB/W. Funky looking speakers though.
 
I want to build my own amp for my home-cinema but i dont have much exeprience on building amps so im currently looking for amp kits.

My speakers are quite high end and requires alot of grunt. "http://www.echoloft.com/articles/june2000/wisma.htm" The silvery ones.
Since i only have the Yamaha PC2602M and thatś a bit too weak.
Using a Rotel DVD and a Rotel receiver.
A amp with the same sound quality as the yamaha but alot more grunt shuld suit me well.

Is there any kits avaliable with that high specs?

Why not get more Yamaha's and use active crossovers?

I just saw Terry O post, great minds think alike.:D

Brett as soon as I saw that you put WOFTAM I thought this guy is a fellow Aussie, wonder how many people know what it means?
 
Last edited:
I'm surprised that you need more power than the PC2602 can give (I also have one).

I'm also of the view, based upon quite a bit of experimentation, that passive biamping is a WOFTAM and will likely not give any more clean level, as the same input signal is still going into both amps, and present at the output terminals.

Actually, I only suggested that as an easy-to-do method, but I agree with you completely that passive bi-amping is, to use the latest addition to my vocabulary: a complete WOFTAM.
(Brett, thanks for the new addition!)

Kits for high power amps are rare as others have stated but Aussie Amps have some that are well regarded by what I've read online. As they come as assembled modules, there is far less risk for a new constructor in getting it right. Modubiz in Italy have some cases that would suit.

In the first instance borrowing or hiring a P7000S for a few days would give you a better idea on whether it's 1100W/4R is enough. These are also very good amps (I have 2) and if you want to get finicky, and void the warranty, the analogue input stages can be completely bypassed easily going directly into the amplifier. I've not done it with mine as they are destined for subs.

I also bet that 91dB is actually at 2.83V so really about 88dB/W. Funky looking speakers though.

That sounds like a good alternative for our friend that's (evidently) starved for watts.

Best Regards,
TerryO
 
Last edited:
The most anoying thing with the pc2602M is that the fan makes way too much noice.
So is fan noise the overriding issue or are you really clipping it?

If it's the former, swap out the fan for something quieter. PC case fan requirements have meant that there are now lots of choices in that regard that are much quieter and sometimes even flow a lot more air for little money, maybe $30. The fan in the Yammie is just a 12vdc unit from recollection.

Mine doesn't bother me and it will be going in a rack out of the listening room as well as powering 101dB/2.83V woofs, but I'm going to change it out when I rebuild the rack in a few weeks, just to give it a new fan for reliability. New PS caps and a few other bits as well.

http://www.silentpcreview.com/article695-page1.html
 
Last edited:
Back
Top Bottom