DIY TOWER SPEAKER PROJECT

[apr2000]

Hi Friends,

I have two 15W/16 Ohms LF and two 15W/8 Ohms HF drivers.

I plan to build(DIY) the drivers as a tower speaker(one/two speaker box?) with a 2 way

passive crossover which support 400w of impedance 8 ohms, I want to control Volume, Bass and

Gain with potentiometers within the speaker box with a AC power supply.

I plan to connect this build speak box with my TV and enjoy perfect music output from these

speaker drivers.

Kindly advise me how the connections has to be connected, also suggest the perfect tone

controller/pre amp filters/Amplifier.

CROSSOVER IN -> PRE AMP/TONE CONTROLLER OUT/Amplifier - ?
PRE AMP/TONE CONTROLLER/Amplifier -> TV OUT - ?

Also I have a 240AC TO 12VDC 2AMP LED driver, kindly suggest whether I can use this to power

on Internal PreAMP/Tone Controller/Amplifier.

I am an entry level learner in this subject, so kindly advise the required spares to be

purchased, so that my investment does not go in vain.

I am located in India.

Expecting an valuable reply from your side.

With Regards,

Prasanna Rangarajan

 

[Poultrygeist]

Welcome Prasanna to AK,

My advice is to stick with a proven design for those drivers.