Mou_Cha84CZ
New Member
Hello everyone,
Im working on a rotary fader upgrade for Pioneer DJM-600 mixer for my friend and im strugling to find the connector to the flat cable, that is used in the fader module.
I tried Google, Google Lens, even ChatGPT. Really im out of ideas.
There is always a way to connect the faders, but i want to do it clean. I dont like messy workarounds.
Worst case is, that will i desolder the original connectors from the leftover modules, but i want to avoid it if not necessary and leave everything intact.
There are 2 variants, one with supporting the fader start, this has 8pins i think and then the regular faders with 6 pins. It would be great to find the connector type name.
The fader module with 6 pins is DWG1597.
Thank you for any hint!
Hynek
Im working on a rotary fader upgrade for Pioneer DJM-600 mixer for my friend and im strugling to find the connector to the flat cable, that is used in the fader module.
I tried Google, Google Lens, even ChatGPT. Really im out of ideas.
There is always a way to connect the faders, but i want to do it clean. I dont like messy workarounds.
Worst case is, that will i desolder the original connectors from the leftover modules, but i want to avoid it if not necessary and leave everything intact.
There are 2 variants, one with supporting the fader start, this has 8pins i think and then the regular faders with 6 pins. It would be great to find the connector type name.
The fader module with 6 pins is DWG1597.
Thank you for any hint!
Hynek
