Does your SX-450 run This hot?

[Greg64]

Guys, I can’t thank you enough! This worked so well!

Got the voltage dialed into 20 mV per side within 1-2 mV.

36 ohms on the right channel and 30 ohms on the left.

Temperatures are remarkably lower. Outputs now measuring 80-85 degrees! Way less stress!

Thank you, Thank you

BTW: This receiver tested out at 19-20 watts!

 

[mrk229]

Safe to assume the trimmer hanging out was for testing?

Glad it all worked out.

 

[Greg64]

Safe to assume the trimmer hanging out was for testing?

Glad it all worked out.

Yep, was able to dial in the proper resistance value to get from 80-90mV to 20. Original values were 82 ohms.

 

[Greg64]

Because of this thread (and numerous other) that were so helpful, I have decided to subscribe to help keep things going on this site.

 

[mrk229]

Because of this thread (and numerous other) that were so helpful, I have decided to subscribe to help keep things going on this site.