Dual 620Q auto return issue

[mulanee]

Hi there,

In order not to pollute old threads like this one https://audiokarma.org/forums/threads/rip-dual-cs-620-q.575098/ I open a new one.

I have this common issue that the arm is not coming back to its initial position at the end of the disc, arm is getting up and down endless.

I understand it is probaby because of the pimple, but cannot figure out how to reach it after having gotten the main plate away.

 

[lini]

Should be covered in this thread over on the German Dual-Board: Gehäuse öffnen bei Dual CS 150Q / 610Q / 620Q / 630Q / 2225Q / 2235Q (Anleitung) - Dual-Board.de

Greetings from Munich!

Manfred / lini

 

[mulanee]

Should be covered in this thread over on the German Dual-Board: Gehäuse öffnen bei Dual CS 150Q / 610Q / 620Q / 630Q / 2225Q / 2235Q (Anleitung) - Dual-Board.de

Greetings from Munich!

Manfred / lini

I see nothing about the pimpel

 

[lini]

I see nothing about the pimpel

See post #3, starting at "Bild 12" (pic 12), which Wolfgang apparently forgot to embed, so you'll find that pic attached at the end of post #3 instead. It shows a bottom view of the drive.

Pic 13 then shows the Steuerpimpel (marked with a red oval) below the main lever.

And in pic 14 you can see the already removed main lever on the right side as well as the Steuerpimpel again, this time marked with a green oval. And pic 15 shows the part, from which the main lever has been removed. Mind you, though, that removing the main lever merely makes it easier to access the Steuerpimpel - but it's not an absolute necessity to remove the main lever for swapping the Steuerpimpel.

Greetings from Munich!

Manfred / lini

 

[mulanee]

Difficult... there is no pic 13 and the latest pic at the end of the post is not reachable even connected (Der Zutritt zu dieser Seite ist dir leider verwehrt. Du besitzt nicht die notwendigen Zugriffsrechte, um diese Seite aufrufen zu können.).
Photos are so small as well.

 

[lini]

Difficult... there is no pic 13 and the latest pic at the end of the post is not reachable even connected (Der Zutritt zu dieser Seite ist dir leider verwehrt. Du besitzt nicht die notwendigen Zugriffsrechte, um diese Seite aufrufen zu können.).

Hmmm - strange... Because I can see pic 13 - and when I click on the attached pic 12, that also opens no problemo.

But maybe the direct links to the pics would work for you.

Pic 12: https://www.dual-board.de/core/index.php?attachment/196107-dual-cs-150-2235-rep-12-jpg/

Pic 13: https://www.dual-board.de/core/index.php?attachment/196108-dual-cs-150-2235-rep-13-jpg/

Greetings from Munich!

Manfred / lini

 

[mulanee]

No right enough to read despite subscription

 

[mulanee]

Well, I tried again the no translated website and it worked.
This Dual unassembly process looks not as an easy job!