E ettore New Member Aug 29, 2021 #1 Greetings all, I have a Dual 1225 and 1229 turntable. The outside wood base on both of them look worn and dried out. I was thinking of rubbing them down with some Linseed or Tung Oil. Any thoughts or recommendations? Thanks. ettore
Greetings all, I have a Dual 1225 and 1229 turntable. The outside wood base on both of them look worn and dried out. I was thinking of rubbing them down with some Linseed or Tung Oil. Any thoughts or recommendations? Thanks. ettore
Montycat Moderator Staff member Moderator Subscriber Aug 29, 2021 #2 You could use those but either some orange oil or Howard's Restore A Finish can do a lot.
E ettore New Member Aug 30, 2021 #3 Montycat said: You could use those but either some orange oil or Howard's Restore A Finish can do a lot. Click to expand... Thanks I will look for those at the hardware store.
Montycat said: You could use those but either some orange oil or Howard's Restore A Finish can do a lot. Click to expand... Thanks I will look for those at the hardware store.
tiga Super Member Aug 30, 2021 #4 Montycat said: You could use those but either some orange oil or Howard's Restore A Finish can do a lot. Click to expand... That's what I used on my 1019 and it turned out great.
Montycat said: You could use those but either some orange oil or Howard's Restore A Finish can do a lot. Click to expand... That's what I used on my 1019 and it turned out great.
R ramjet AK Subscriber Subscriber Aug 30, 2021 #5 Go for the Tung over Linseed..........the later takes forever to dry.
stereofisher Music forever Subscriber Aug 30, 2021 #6 Good idea^^, I have used Old English with good results.