Hello everyone,
I would like to ask for help to solve the problem with Dual CS 750 turntable.
By moving the arm from home position the table starts spin. The problem is, that it is full speed spinning without any control, probably more then 78rpm.
RPM selector does not change anything. I got access to that switch (according to service manual) and cleaned it using contact cleaner, switching it through all positions. This did not help.
What might be the problem?
Thank you
I would like to ask for help to solve the problem with Dual CS 750 turntable.
By moving the arm from home position the table starts spin. The problem is, that it is full speed spinning without any control, probably more then 78rpm.
RPM selector does not change anything. I got access to that switch (according to service manual) and cleaned it using contact cleaner, switching it through all positions. This did not help.
What might be the problem?
Thank you