• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Dynaco SCA-80Q upgrade

SolidState73

New Member
I was lucky enough to find a working early '70s Dynaco SCA-80Q integrated amplifier on eBay. After hooking it up, the amp sounded a bit harsh and had some hum in the phono stage. After installation of the UpdateMyDynaco power amp upgrade and their C9 capacitor replacement kit, this Dynaco sounds like I remember from my college days. I've been spinning vinyl happily ever since the upgrade.
 
Last edited:
Register to hide this ad
Listening to mine now, all that's been done to it is power cap in back, by resistor board, replaced prior to my acquisition. I rediscovered this in my accumulated pile recently. I assume I got it for peanuts at Hartville flea market long ago. Had a locked-up treble pot, missing knob,too. Fixed the pot with butane lighter & pb blaster followed by a good hose-down from back with contact cleaner.
Knob problem solved efficiently. Big knob on volume control. Switch indicator knob on selector.
No reason for upgrades yet, sounds good to me! May eventually replace rca strips in back,but that's more aesthetic than anything else at this point.
I think this is one of the factory -built units due to riveted terminal strips in back & inspector stamps inside.
For its size, this thing is a kicker! Feeding pair of klipsch synergy b3's, sounds bigger than it is. My new beater amp for outdoor use when it warms up again.
Would send pics, but they won't load.
Crank it up!:rockon:
 
Indeed! I love that Dynaco. This SCA-80Q has moved up to be my primary amp at home. I'm happy with the power, as this unit tests out at 50 WPC after the UpdateMyDynaco upgrades. It reminds me of my old dorm room system in 1973: Dynaco SCA-80Q amp, KLH Model 17 speakers, Pioneer PL-12D turntable with a Shure M91ED cartridge. A nice sounding system at the time for a poor student. Nowadays, its the upgraded Dynaco with 70's Kenwood speakers, Technics SL-1300 turntable with a Grado Black cartridge.
 

Attachments

  • IMG_0784.JPG
    IMG_0784.JPG
    53.4 KB · Views: 47
Cool beans! Now I know which knob I'm missing, I thought I was short one small one, but it's a big one after all. I just put a different one on selector switch, it has a marker corresponding to the switch position.
Can't bring myself to tear into a working unit for upgrading, it has to give me a reason.
Still can't load pics,"file too large"! Odd, since I've posted other more complex (content ) ones on here recently. :mad:
Glad you're "back innit"!:bigok:
 
I did a Full Monty updatemydynaco overhaul on my SCA80Q. Preamp, Power amp, power supply and Gold jacks. It’s my main everyday amp now. I have quite a few amps including a Dynaco Stereo 400 and Hafler DH200. The SCA80Q always puts a smile on my face and I never feel the need to replace it.
 
I have one of these that I purchased from a fellow AK'er for a very fair price. I have some replacement parts, and I've been hemming and hawing about starting this project -- the interior is sooo filthy, that I'm tempted to do the "run through the dishwasher" trick to see if there's any improvement.

One thing I noticed on mine -- all of the flip switches seem really "soft." -- by which i mean, none of them snap like you might expect; I have snap switches on other receivers, which have a nice, springy click back and forth -- these, i just sorts push them in; one of them doesn't seem to even really stay firmly in place.

Is this NORMAL for these switches? Anyone else have this same experience, and that's just how these switches were designed? or are mine failing/faulty, and should be replaced?

Trying to find new, off the shelt QPTT (or whatever the manual calls the one 4-way switch) has been next to impossible; I'd love to replace them all with some nice, new, snappy rocker switches, if anyone has good guidance on that! (or, if I should just cool my jets and stick with the old stock switches). Thanks to anyone who reads this!
 
They don't "snap". They're basically rocker-sliders. I recommend leaving them as-is & getting used to it.
 
Back
Top Bottom