Electro Voice Aristocrat diy X36 Crossover for sp12b and T35

[hrtattckcity]

Before I commit to this with solder, does anyone have any comments or corrections on this wiring diagram?

I am adding T35's back into my aristocrat project with this diy X36, as I only had one x36 and it seemed to make more sense to make fresh ones as opposed to paying the price used ones are going for.

Thanks.

 

[fred soop]

Looks good.

 

[hrtattckcity]

Looks good.

 

[doctorolds]

Nice work on your fabrication!

 

[fred soop]

I will need to do something similar. I have 4 pair of EV 8 inch full range speakers in the basement and I am adding midrange and tweeter horns in one location. These consist of the HF-1 and MF-1 step up kits from many years ago. I do not have the 3500 Hz crossovers and the 1000 Hz crossovers need rebuilding. Also, the originals were first order and I'd prefer a second order crossover. Presently working on "cabinets" for the horns. They don't need enclosures but just a wood frame to support them vertically.

Did you get the parts from Parts Express? I want to talk to them at Axpona this year but the April show has been rescheduled for August due to health concerns. Hope they can still hold it.

 

[hrtattckcity]

Coils and l-pads from Parts Express and caps from my parts binartsconnexion sells those axon caps for 1/2off much of the time so I sometimes buy extras.

A few extra shots of these in situ.

cut the scrap ply so it could just fit into the rear of the cabinet.