• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Electro Voice Sentry III ...defect or?

Valerij EVS

Member
Good afternoon...music lovers :)
I'm new here.I am hope for your help...

I searched the entire Internet in search of at least some information about acoustics Electro Voice Sentry III

In short....
Have this acoustics.I spent a very long time looking for this model...listened to a lot of vintage technique and stopped at this acoustics.Really like the flow, space, air! And it would seem,there is no limit to my happiness.
But there is one important detail for me,that does not give me rest.

The point is that staff driver Electro Voice ev1824m, as it seems to me at a certain frequency (namely 1,8kHz /watched the frequency with a microphone) produces some sort of distortion.When listening to music it seems this frequency bothers,she has a clear rise at the level of others.She sticks out annoyingly.

I have a single question whether this can be a defect or this is the factory error,which seems to me unlikely.

Thank you in advance.
 
Last edited:
Register to hide this ad
First off, welcome to AudioKarma...I own a pair of Sentry III's, and I don't have the issue you decribed. It is alittle hard to understand exactly what the issue is without actually hearing it. If you could post a audio clip, maybe there is a chance of better understanding the problem.
 
First off, welcome to AudioKarma...I own a pair of Sentry III's, and I don't have the issue you decribed. It is alittle hard to understand exactly what the issue is without actually hearing it. If you could post a audio clip, maybe there is a chance of better understanding the problem.

Hello,I think that the video is unlikely to give any response...as it will be little noticeable...
 
I will try later to show a chart of the noise.Everything is visible on it.

By the way I'm looking at a crossover,and I understand that it also requires improvements,I do not like its original coils with a core...
 

Attachments

  • IMG_20180224_164349.jpg
    IMG_20180224_164349.jpg
    69.7 KB · Views: 73
  • IMG_20180224_164406.jpg
    IMG_20180224_164406.jpg
    108.5 KB · Views: 72
The EV Sentry III is a very nice speaker. Congratulations on finding a pair, and welcome to AudioKarma.

Since the 1800Hz distortion is coming from both speakers, I'm wondering if you have tried to power them with a different amplifier. It could be that the amplifier itself could be at the root of the problem.

Does the distortion occur on different sources? For example, does it happen when you use CD, digital, phono, radio, etc??? I am just curious if the problem is coming not from the speakers, but from the source or amplifier/receiver/ integrated, or whatever you are using to amplify them.

Also check ALL connections from your source all the way to the speaker cables, and the connections on the crossover. But I'm of the opinion that the problem is not in the speakers because it is coming from both of them at the same frequency.

GeeDeeEmm
 
The EV Sentry III is a very nice speaker. Congratulations on finding a pair, and welcome to AudioKarma.

Since the 1800Hz distortion is coming from both speakers, I'm wondering if you have tried to power them with a different amplifier. It could be that the amplifier itself could be at the root of the problem.

Does the distortion occur on different sources? For example, does it happen when you use CD, digital, phono, radio, etc??? I am just curious if the problem is coming not from the speakers, but from the source or amplifier/receiver/ integrated, or whatever you are using to amplify them.

Also check ALL connections from your source all the way to the speaker cables, and the connections on the crossover. But I'm of the opinion that the problem is not in the speakers because it is coming from both of them at the same frequency.

GeeDeeEmm

Thank you very much for your opinion...!!!
I took these moments into account.I will say more, in the company of like-minded people we managed to make a test both with a crossover and without.Different sources, different amplifiers...And the so-called rise at 1.8 kHz does not disappear anywhere.The rest of the frequency, surprisingly fairly even.To be honest I'm not even surprised, since the sound very beautiful,if do not pay attention to the moment under discussion...
 
OK. Let's go another direction.

1800Hz tones will be coming from the midrange horns only, so that's where you will need to focus. Before removing the midrange drivers to inspect, I'd trace the midrange circuit through the crossovers and replace the capacitors in that circuit if you haven't already done so. In fact, it would be a good thing to replace all the old capacitors while you are in there.

This is a very perplexing problem because the distortion you hear is coming from both speakers. That is very unusual.

GeeDeeEmm
 
OK. Let's go another direction.

1800Hz tones will be coming from the midrange horns only, so that's where you will need to focus. Before removing the midrange drivers to inspect, I'd trace the midrange circuit through the crossovers and replace the capacitors in that circuit if you haven't already done so. In fact, it would be a good thing to replace all the old capacitors while you are in there.

This is a very perplexing problem because the distortion you hear is coming from both speakers. That is very unusual.

GeeDeeEmm

Yes, I also initially thought that it was all a matter of an amp, or a source, wires, crossover and, at worst, a room.
but all these doubts were dispelled...when we checked the driver in the horn directly!!!Frequency plus / minus similar to each other...

So I began to doubt whether this could be a factory injury...
 
Hmmm ,you might need to open up your midrange driver and check a few things
Clean Vc gap,tiny vc rub due to over driven or heat
Look for cracks or hair line fractures
Look for diaphragm surround assemblies if it's all in one piece,also check it f diaphragm has some flat spots due to over excursion ,
Borrow some other 2 inch drivers to test, and use plastic or non magnetic screwdriver as the magnetic force is strong
 
Hmmm ,you might need to open up your midrange driver and check a few things
Clean Vc gap,tiny vc rub due to over driven or heat
Look for cracks or hair line fractures
Look for diaphragm surround assemblies if it's all in one piece,also check it f diaphragm has some flat spots due to over excursion ,
Borrow some other 2 inch drivers to test, and use plastic or non magnetic screwdriver as the magnetic force is strong

Yes, thanks, as an option, I'll try.
The only question is how easily the driver can be disassembled..the conclusions of the diaphragm are surely soldered...
You gave me reason to hope..:)Thank yo...
 
Removing the driver is easy I think they are the screw on versions and not bolts,you can always take the drivers to a pro audio shop that works on beyma,bms ref,ciare,faital,jbl,ev,etc
They might even have some ideas on your problem ,tschuss
 
Here is the promised chart...Second chart, original!


I look, I see no difference..:)
But the computer and the ear cannot be wrong at the same time :)
 

Attachments

  • Elektrovoice.jpg
    Elektrovoice.jpg
    45.1 KB · Views: 41
  • orig.EVS III.JPG
    orig.EVS III.JPG
    49 KB · Views: 43
Last edited:
Removing the driver is easy I think they are the screw on versions and not bolts,you can always take the drivers to a pro audio shop that works on beyma,bms ref,ciare,faital,jbl,ev,etc
They might even have some ideas on your problem ,tschuss
I will try to make out myself,
 
Honestly, those charts do not look abnormal. I'm stumped. I can't understand why you are hearing distortion at 1.8kHz. Not based on the charts. And both horns. ?????????:dunno:

Have you tried running an adjustable frequency sweep through your system to absolutely verify that what you are hearing is distortion and not some kind of sympathetic vibration in the cabinets or in your room?

GeeDeeEmm
 
Back
Top Bottom