EPI M201 Crossover

[colohiker]

I finally refoamed my 201's and recapped them with some 10uf electrolytes that I had lying around. Looking at the Human site, it looks like the Epicure 20's used several different crossovers that included a .225mh inductor. Is it worth upgrading the crossover to include the inductor or should I just keep the simple crossover the 201's came with?

 

[colohiker]

FWIW, this is the best visual representation that I have been able to come up with of why it might be worth the effort to replace the original rubber surround with new foam.

Rubber roll cut off of woofer


New filleted foam. With same weight.

 

[satellite65]

I had EPI 201's and Epicure 20+'s at the same time and preferred the 201's. I would leave the crossover as is, other than bypassing the switch.

 

[saea501]

I had EPI 201's and Epicure 20+'s at the same time and preferred the 201's. I would leave the crossover as is, other than bypassing the switch.

I agree whole heartedly.

I was talking to Winslow about putting an LC cross in the 201s. His response.....kind of shrugged...'I don't know...try it'.

Leave it as it is.

 

[Nachelsoul]

I would leave the crossover as is, other than bypassing the switch

I have read a lot about bypassing the switch but never found how it has to be done. Has anybody some squematics or just tell me how it should do?
I have a M201 pair coming home from the States. I´m addicted. Thanks pals.