• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

EV Sentry 500's anybody?

BobbyBluz

Super Member
I wondering who else here has a pair of EV Sentry 500's and what you're driving them with. I just replaced the Crest FA901 driving mine with a Crown XLS 1500 and they took on a whole new life. EV sure had it right when they designed the Sentry 500's.
 
Register to hide this ad
Last edited by a moderator:
I just picked up a pair of these. I intend to drive them with a pair of Dynaco Mkiii amps. The woofers had been replaced with a pair of new Goldwood 12s (made in China) to my dismay. They looked original with the foam surround and all. Anyway, sold those woofers on Kijiji... I wasn't able to find the model number of the original woofers in the EV Sentry 500, so, I went ahead and bought a pair of EV SX300s (apparently ceramic magnets and sensitivity is a match), for a song, and plan to try them as soon as I am done redoing the surrounds on them. My question is, what is the model of the original woofer in the Sentry 500s? Can anyone help? Thank you
 
I have a Repair Parts list dated June 1994 that shows the part number for the Woofer in the Sentry 500 as 1812-0560.
Tweeter is 89545 and the Xover as 81851.
Hope this helps somehow.
 
Thank you for the information. Yes, it is very helpful.
It appears to me that EV uses one basket and magnet for their 12s and just varies the the cone assembly. So, I think, the basket and magnet assembly I bought, used in the SX300, should be a match, if I recone it with a recone kit for an EV 812-0560, which is used in the Sentry 500. Has anyone tried this? Am I correct in my "assumption"?
 
Here's pics of the crossovers in the Sentry 500's I'm working on.
I don't plan on re-capping the crossovers at all. I would like to find details on that LF extension kit thing tho.
 

Attachments

  • IMG_20200912_122910.jpg
    IMG_20200912_122910.jpg
    159.7 KB · Views: 39
  • IMG_20200912_122919.jpg
    IMG_20200912_122919.jpg
    145.9 KB · Views: 38
The woofers are super well built. No doubt you could hit these with 80 watts continuous, all day long. I've done some high volume testing (my garage) and they never did break up\distort. But I wasn't pushing more than 40 watts I bet - they were freaking loud and clear.
 

Attachments

  • IMG_20200912_172310.jpg
    IMG_20200912_172310.jpg
    134.7 KB · Views: 42
  • IMG_20200912_172334.jpg
    IMG_20200912_172334.jpg
    132.6 KB · Views: 37
Last edited:
Old thread. Just got mine a while. I’ve downtuned my port/cabinet. My pair has a low end in the 20Hz realm. Driving mine with Accuphase P20 & C200
Preamp
 

Attachments

  • IMG_0748.jpeg
    IMG_0748.jpeg
    168.6 KB · Views: 5
Back
Top Bottom