F-2656 Resistor match

[degdug]

I need to confirm resistor values for:

R30
R31
R32
(The light blue fusible resistors in the photo)

I believe they are all 1 ohm 10% per the manual. But I'm getting 1G ohm 10% on the color bands.

Can anybody confirm these values?

 

[EastPoint]

They are 1 ohm. The third band is silver, not gray.

 

[degdug]

They are 1 ohm. The third band is silver, not gray.

That would make it .1 ohms then right? Service manual says 1 ohms but I'm not getting it from the color code. 1, 0, x.01, 10%?

 

[EastPoint]

Do you have a multimeter?

 

[degdug]

Do you have a multimeter?

Yep. Reading about 1.4. I'll go with the 1 as you said!

Thanks!

 

[skippy124]

Yep. Reading about 1.4. I'll go with the 1 as you said!

Thanks!

Hi,

When measuring low ohm resistors, you need to take into account the multimeter test lead resistance. Touch the leads together and see what the reading is, it will be typically 0.4 to 0.6 ohms. Subtract the reading you get from the measured value when testing low ohm resistors.

Cheers
John