• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Fisher - The 600

Hi, That looks exactly like a 600-S that I did a cabinet for a guy in Spain (its shown on my website). Fisher did things like that, my 800-C is not labeled as such on the front , simply "Executive", then when you look at the serial number section it lists it as 800-C. Yours is a beautiful receiver, I have been looking for that model for some time. You lucky guy.

You mean a 500-S? I don't think a 600-S exists. If it does, I sure would like to see some photos of it. I have a 500-s and it does look a lot like a 600 and they share the same dimensions and output tubes. However, there are some serious differences in their electronic design. The 500-S is much closer to the later Fishers 500 B/C and 800 B/C.
 
Indeed it is labled TA-600 on the PT, serial# 57466

No MPX on board, has a rather confusing TUNER and MPX
on the selector, the latter of which is a set of
inputs for the outboard MPX.

Betcha the Fisher MPX adaptor will go for more than the receiver.

There's an A and B output labed FM and MPX respectively, and MPX A and B level pots on the rear - what's all that about?
 
Indeed it is labled TA-600 on the PT, serial# 57466

No MPX on board, has a rather confusing TUNER and MPX
on the selector, the latter of which is a set of
inputs for the outboard MPX.

Betcha the Fisher MPX adaptor will go for more than the receiver.

There's an A and B output labed FM and MPX respectively, and MPX A and B level pots on the rear - what's all that about?

Fisher MPX adapters come up for sale on E-Bay all the time. You can also build a solid state one with a kit sold online.
 
Fisher MPX adapters come up for sale on E-Bay all the time. You can also build a solid state one with a kit sold online.

I've got several including an MX-99 and a SS homebrew using Bob Firzgerald's MPX board, but I do like to try to pair up the 'right' gear when possible.
 
Back
Top Bottom