• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Fisher X202B Knob Caps

Musika

New Member
Here's a couple of pics of my newly-acquired Fisher X202B. It's a beautiful machine.... except for those metal knob caps that came unglued that you see missing in the closeup picture. Anybody have good tips on what to use to clean off the old glue from the plastic knob and what glue to use to attach the metal cap back on the knob? Appreciate the help:yes:


IMG_3163.JPG


Notice the missing knob caps

IMG_3171.JPG
 

Attachments

  • Fisher X202B-003.jpg
    Fisher X202B-003.jpg
    67.6 KB · Views: 8
  • Fisher X202B.jpg
    Fisher X202B.jpg
    65.1 KB · Views: 7
Register to hide this ad
I have a x-202 with a couple missing caps. I got a set of replacement caps from a very kind fellow aker who got them on the bay. I have not installed them yet but they come with "high strength industrial grade double sided tape" which he, eBay seller that is, recommends over liquid adhesives. Im also curious about the cleaning though.
 
Lighter fluid or 3M adhesive remover. dampen the old glue with either of these, let it stand a few minutes and wipe or scrape off.
 
I got mine off a guy on ebay, I think he's in California he sell's the nice heavy ones.
There's someone else as well but his are pretty thin, be careful, nice amp!

Tube
 
It wasn't obvious to me that you needed new knob caps.
For reattachment, Elmer's rubber cement works.
 
Back
Top Bottom