The Challenge!
I was able to get a pair of Frazier Midgets after they were replaced during a Lear Jet remodel. This is a single driver, alnico, about 5 inches. *IF* I used the same cross over design as my Frazier Mark 4s... to allow me to add a rear firing horn tweeter (a very small metal t-50n sansui), remembering the Mark 4 (10 inch woofer/and/standard 7x3 horn) has a 1MFD coil/coke, where should the choke value be for the 5 inch alnico driver????? Some guesses and reasoning will be max helpful and thanks ahead of time
I was able to get a pair of Frazier Midgets after they were replaced during a Lear Jet remodel. This is a single driver, alnico, about 5 inches. *IF* I used the same cross over design as my Frazier Mark 4s... to allow me to add a rear firing horn tweeter (a very small metal t-50n sansui), remembering the Mark 4 (10 inch woofer/and/standard 7x3 horn) has a 1MFD coil/coke, where should the choke value be for the 5 inch alnico driver????? Some guesses and reasoning will be max helpful and thanks ahead of time
