Hello,
I have a very nice G9700 with a power meter issue.
On the left channel indicator the first two LED’s come on at low volume as the volume goes up the 2nd LED goes out followed by the next 4 LED’s staying off, as the power goes up the remaining LED’s come on and operate as expected.
Before I jump in and start changing caps on the F-3082 board I decided to ask here for advice on the best approach to this.
I did find some information here on the forums which was dated and inconclusive, I suspect that the whole LED panel will need to be replaced but I was just looking for some advice from folks here that may have more experience with these than I do.
Thanks in advance.
I have a very nice G9700 with a power meter issue.
On the left channel indicator the first two LED’s come on at low volume as the volume goes up the 2nd LED goes out followed by the next 4 LED’s staying off, as the power goes up the remaining LED’s come on and operate as expected.
Before I jump in and start changing caps on the F-3082 board I decided to ask here for advice on the best approach to this.
I did find some information here on the forums which was dated and inconclusive, I suspect that the whole LED panel will need to be replaced but I was just looking for some advice from folks here that may have more experience with these than I do.
Thanks in advance.