• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Glue for refoaming surrounds

canuckaudiog

On a quest for high fidelity
Hey guys,

Just a quick question. I was wondering where you guys typically find the glue you would use for refoaming surrounds. From what I understand it needs to not be a quick drying solution, and also needs to dry clear. Just wondering what you guys use and where you buy it from, I don't really want to buy glue over the internet when I'm sure I could find some locally.

Thanks!
 
Register to hide this ad
Aleene's

I use Aleene's.

I like the fast grab type. I've done enough now that I like to "git-r-done".
I've even taken to using a hair dryer to speed things along.
Makes it easier to get all the edges worked down and looking good.

I generally apply a nice bead around the cone side of the foam and smear it around with a q-tip to get an even coat. I let that set up then apply a bead around the frame, let it set up a little and hook it up in the speaker with the cab on its back and play music to check the alignment on the VC. Softy at first and once the glue is set enough, I'll give them some heavy music just to make sure its good.

Let it set up over night and reassemble every thing and rock on.

The hair dryer trick works great for getting the lip on the cone tacked down well. Make sure you have just enough glue to squeeze out a tiny bit when you work it down and the heat makes it set up quick enough that you can get it all by hand quickly.
 
I use Aleene's.

I like the fast grab type. I've done enough now that I like to "git-r-done".
I've even taken to using a hair dryer to speed things along.
Makes it easier to get all the edges worked down and looking good.

I generally apply a nice bead around the cone side of the foam and smear it around with a q-tip to get an even coat. I let that set up then apply a bead around the frame, let it set up a little and hook it up in the speaker with the cab on its back and play music to check the alignment on the VC. Softy at first and once the glue is set enough, I'll give them some heavy music just to make sure its good.

Let it set up over night and reassemble every thing and rock on.

The hair dryer trick works great for getting the lip on the cone tacked down well. Make sure you have just enough glue to squeeze out a tiny bit when you work it down and the heat makes it set up quick enough that you can get it all by hand quickly.

Thanks for the tips! I'm gonna need all the advice I can get, these are unobtanium drivers.. well, I guess worse case scenario is I redo it after but no thanks, I wanna get it right the first time.
 
Back
Top Bottom