• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

headphone amps?

that's matter of opinion tho. there should be no argument going on over receiver/integrates vs. headphone amps. matter of preference. if you like dedicated headphone amps or receivers it shouldn't matter. just enjoy your music. that's what it's about right? also only one that can determine if they're doing their headphones justice is the person them-self cause all our ears are different. all we should do is just answer op question reason behind using headphone amp not worry about someones preference.

You can only have a valid opinion if you have a frame of reference. To blindly say that headphone amps are a waste of money, never having heard both types, is arrogant at least. Base your wording on facts and then leave your opinion since it will hold more weight then. But you are right, at the end of the day some people will love dedicated amps, and others will love built-ins. Some will say potato and others will say potatoe. It doesn't really matter though. Just enjoy the music.

Jimmy
 
I am going to disagree with most of the previous posts and say they are a complete waste of money. If you have a good Hi-Fi amp with a headphone out it is going to be driven straight off the power amp via dropper resistors. It will sound as good as any dedicated headphone amp. It may be a different story if the headphone output is a separate circuit and driven by op-amps but the last 40 odd amps I have serviced/repaired have not had this so they are far and few between.

However if you only have a cd player or laptop etc with headphone outputs you would benefit greatly from using a dedicated headphone amplifier. Something else headphone amps have going for them is they look pretty when you post pictures on forums so you look like a true head-fier

I checked out my Luxman L-430 and it indeed does have the speaker terminals connected via 470ohm resistors to the headphone socket.

But maybe an impedance mismatch could occur, what if the dropper resistor values were juggled?
 
Last edited:
When I was looking to purchase my headphones I wanted the K240's because the majority of people over at Head-fi gave them excellent kudos. I went to my local Guitar Center and heard them and was very impressed by how neutral and open they sound. They wanted $199.99 for them and would not budge on the price. When I came home and got on Amazon to search for a better price I came across the K601's for $189.99! I bought them without even hearing them just on great reviews I read on the net. The K701/702's were $50.00 more and I had already spent $250.00 on the amp that I just did not want to pony up the difference. The reviews I read comparing the 601's to the 701/702's were that the difference was at best a tad more soundstage and maybe a bit more bass. Many people agreed that the 601's were the sleeper headphones, expecially for the price. So that's what I bought. I've never heard the K701/702's to make an honest opinion, but man do I love my K601's. I know it's cliche' to say things like "I'm hearing things I've never heard before", and "it sounds like I'm right there with the artist". But you know what? I have to say those things are very true. It's probably because the headphones are so close to your ears that you can hear micro details that are often not heard on big speakers in an open room. I don't know really, except that I truely love these phones/amp combo and have literally been rediscovering my music all over again. The Little Dot MKIII is also my first headphone amp that I've owned. I was on the wall for a few months as I was studying headphone amps. All the reviews also were glowing about the Little Dot line of amps. I sprung for the MKIII and have also fallen in love with it's dead silent background and very silky smooth tube sound. The pairing of my K601's and MKIII are just soooo smooth, full, wide, and rich that I'm so completely happy with the investment.

Jimmy


Thanks a lot for the detailed and helpful reply! :thmbsp:

I've read over on Head-Fi some who say the K601 and even K501 are better than the K701/02 because their mids are less "clinical". So I'm interested in them as I really like the sound of my 702's so if the old models were better or similar with a different flavor that would be interesting.

I bought the 702's last March I think after researching many cans around the $300 mark. I don't even think I knew of the K601's until afterward, but I probably would of bought the 702's anyway just because I had more knowledge of them. I got the 702's for I think $260 shipped iirc from BH Photo. I just checked the K601's on Amazon and they are $230 there! Don't you love how prices float up and down randomly? :no:

I agree about your assessment of the mirco details headphones can bring out. I'm not sure if it's just because they are right by your ears so you pay more attention to them or because some cans are tuned to bring out more micro detail in the upper mids and highs, but yea, when I got the 702's I heard some micro detail in music I had heard thousands of times that I didn't hear before, or, at least (and more accurately) it was easier to pick up.

However, at the time I had "only" my Usher 520 monitors for my best speakers. And while those do have great detail and clarity, I now have some Quad 12L2 monitors which have really brought out the subtleties and nuances in my music like never before (it's like I can hear colors and grab sounds out of the air, like they are almost tangible as they float in the air...and no I don't do drugs and never have! lol). I don't know if it's fair to compare headphones to speakers, but although the K702's are very detailed my Quads are more so (with the Ushers it was more of a tie). I do listen to the Quads in a medium sized home office though for one thing, so I'm always positioned right in between them (they sit on either side of my computer desk away from the wall), though not always in the "sweet" spot (which would be in my recliner back away from my computer desk). They are also more realistic (as in "wow...this music is RIGHT here, I can't tell I have speakers!") than any cans I have tried, but speakers on the whole seem that way to me over cans although the 702's certainly have a wide sound stage for headphones (sometimes I think I'm hearing sounds coming from outside my cans during movies or some music with weird random background noises).

Anyway, I enjoy both the speaker and can presentation of music/movies although I do like speakers more and listen to them about 70-80% of the time.

I'm sure your amp is great too btw. I've long known of the LD series of amps and thought about getting one for awhile. I don't know why I didn't really, but in any case I have 3 headphone amps I've now tried instead. I stopped once I hit the Matrix M-Stage and feel no need to upgrade. All my amps/cans are here btw:

http://www.audiokarma.org/forums/album.php?albumid=1010

(Not my pictures).

Thanks and enjoy the amp/cans! :music:


You can only have a valid opinion if you have a frame of reference. To blindly say that headphone amps are a waste of money, never having heard both types, is arrogant at least.

Jimmy

I agree, but how in the world can you know whether or not he has ever heard or owned any external headphone amps? (I'm a guessing he hasn't either though from his wording...but that's a guess, not an assumption I'm going to judge him off of! :tongue:).
 
All the more reason to get a dedicated amp if you're having noise and impeadance issues. I would file this under "why a dedicated headphone amp is better than not".

Jimmy

I would like to get a headphone amp when funds allow(who knows when that will be). Till then though the r7 will do and for it's single digit price it's hard to complain. :thmbsp:
 
It is my opinion (based off my experience) that no matter how easy your cans are to drive, an external headphone amp will make them sound better than any receiver/integrated amp out.

I definitely agree with this. Just as I always urge people to use independent phono preamps, I urge the use of an independent headphone amp.

Little Dot has already come up. I can highly recommend the Little Dot I+ for around $100, which I have, and it's bested the $350 Grado RA-1, and the $300 Pro-Ject Head Box SE.
 
A statement born of ignorance and/or avarice.:yes:

I'm pretty sure he's never heard a set of phones thru a dedicated headphone amp. I have both to compare to and can say without a doubt a dedicated amp is better. And yes....they do look pretty.

No a statement born of extended listening, extensive knowledge of electronics !

I have listened to a number of headphone amps and done A/B comparisons with my integrated amplifier that is what my opinion is based on.

I have even designed and made my own headphone amplifier's using various technologies the conclusion.....you can colour the sound to your own preference depending on the circuit design. All headphone and integrated amplifiers colour the sound to some degree as do headphones it just then comes down to personal taste. My point is if somebody has a good quality Hi-Fi amplifier that there is not going to suddenly be angels flying all around them when they buy a headphone amplifier.

Then you have to considered the placebo effect after spending you hard earned cash on that little amplifier shining away on your rack, big aluminium knobs, glowing valves god that sounds good.....we have all been there.

Bashing me because it doesn't fit with your opinion doesn't make you right.
 
Last edited:
I definitely agree with this. Just as I always urge people to use independent phono preamps, I urge the use of an independent headphone amp.

Little Dot has already come up. I can highly recommend the Little Dot I+ for around $100, which I have, and it's bested the $350 Grado RA-1, and the $300 Pro-Ject Head Box SE.

This is a strange statement, you say it has bested the Grado (probably the most uncoloured neutral sounding headphone amplifier) what do you mean by bested ? do you not just mean you prefer as the little dot 1+ doesn't have any valve amplification just a valve buffer driven into an opamp with transistor output. The valve simply adds distortion ie: its own sound signature.
 
I have to agree with both sides on this. I've looked at as many schematics for headphone amps that I could find on the web and they run the range from really good to total crap. It just depends on which headphone amp you are comparing to which receiver. Many vintage receivers seemed to be designed with low impedance (8 or 16 Ohm) headphones in mind. They will quickly run out of voltage swing when used with "modern" headphones that all seem to have much higher impedances. This is probably the main reason to move to a dedicated headphone amp, although some I've seen have no more voltage swing available than the cheapest receiver. Some receivers actually use the main amplifier output to drive headphones through a resistor to drop the levels down to reasonable values. This might sound really good if the resistor size matches the headphone impedance such that the amplifier volume is kept in a reasonable range. If the amp volume has to be turned down too far, I would think crossover distortion would dominate (in a class AB biased amp). I also wonder about the total loss of damping factor with this approach, although I don't know if that even matters with the tiny drivers used in a headphone.
The headphone output of my Mitsubishi pre-amp was nothing special, so I decided to try an external headphone amp. I actually was going to design and build my own, since any that looked like they had a decent circuit in them were way over-priced (like all good audio gear is). So I bought the Little Dot 1+ mainly to used the housing, transformer, switches and knobs and such as a package for my own design. The LD 1+ actually is cheaper than I could go out and purchase these components. So I was going to gut the circuit inside and replace the circuit board with one of my own design. But when I got to tracing out the circuit that the LD 1+ used, it was very close to what I was going to design anyway. A very nice, solid design (nothing super, but very good). I did bypass the tube stage, since as Egg_on_Toast pointed out, it adds no amplification (except current gain that is not needed) and only adds distortion (or tube color if you are a tube person). I then modified the circuit a bit. I changed it so the output phase was not reversed and bypassed the Vbe multiplier circuit to improve the transient response a bit.
I can't say for sure that it is an improvement over my Mitsubishi pre-amp headphone out. I think it sounds better, but I certainly would not rule out "expectation bias" for my liking it better. At any rate, it sounds good enough that I don't feel compelled to go after one of the much more expensive headphone amplifers that are on the market. I certainly understand people that do. If I had the bucks and I felt that the rest of my system warranted it, I certainly would.

Terry
 
Last edited:
No a statement born of extended listening, extensive knowledge of electronics !

With an extensive knowledge of electronics, i'm sure you can explain why a headphone amp is better than dropping resistors;). I'm not going to say that you are incorrect, since it's opinion, but there are good reasons why a headphone amp should sound better. I'm majoring in electronic engineering, there are very basic reasons why a dedicated headphone amp will perform better than a attenuated dropping resistor from a power amp.

Just as you have A/B'd so have I, I have a older set of 8ohm pioneer headphones, they sound alright through my old pioneer receiver, and pretty good through the little dot I+. However, when you plug in the Grado sr-60i's (32ohm), the little dot blows the receiver out of the water, that's my experiance anyway.

Then you have to considered the placebo effect after spending you hard earned cash on that little amplifier shining away on your rack, big aluminium knobs, glowing valves god that sounds good.....we have all been there.

Bashing me because it doesn't fit with your opinion doesn't make you right.

Yep, that's part of it, regardless of how you come into it. Then again, it is possible to spend money and not like something, many have run into that with expensive items before;)

This is a strange statement, you say it has bested the Grado (probably the most uncoloured neutral sounding headphone amplifier) what do you mean by bested ? do you not just mean you prefer as the little dot 1+ doesn't have any valve amplification just a valve buffer driven into an opamp with transistor output. The valve simply adds distortion ie: its own sound signature.

I think that means it beats the grado in sound quality, which makes completely sense, while there 'phones are great, the RA-1 is a gyp. It's about $350 and for that you get a couple big-ish caps and a single op-amp. The little dot, despite being around $120 has a op-amp driver stage, a tube buffer, and a transistor output. You can mod the little dot as well, which is impossible in the grado from what i've seen. The valve circuit does just add distortion, though the ability to model tubes is more than worth it's slight distortion figures (which I believe is probably far less than a receiver's attenuated output).

This all comes down to personal choice, enjoy what you like, don't let any one talk you out of it, I really enjoy my headphone amp, but i'm sure others don't require one, or don't want one, fine.
 
No a statement born of extended listening, extensive knowledge of electronics !

Then you have to considered the placebo effect after spending you hard earned cash on that little amplifier shining away on your rack, big aluminium knobs, glowing valves god that sounds good.....we have all been there.

Bashing me because it doesn't fit with your opinion doesn't make you right.


Well first I'm certainly not bashing anyone. But let me offer some valid points of view coming from someone who also has many years of repairing, modding, testing, and building electronics.

1: A headphone amp connected to a main amp will better the sound from a dedicated headphone amp.
I believe this can never be true. First you assume everyone has a receiver ( since these are the only gear that have built-in power amps ). But if we have separate pre and main amps then there is no way to have the amp "resistered down" to a headphone jack. A preamp will have to have it's own dedicated headphone amp circuit designed, and the chances of the manufacture paying as much attention to that circuit over the rest will most probably be very little.

2: Having a power amp resistered down to a headphone jack presents many problems. First you will not be able to adjust the headphone amp impeadance to match specific headphones. You are relying on resistering down a power amplifier designed to push big impedance heavy speakers to drive delicate headphones with their own characteristics. Resistors can never provide an accurate match to all headphones. A dedicated amp is designed from the ground up to drive headphones. You wouldn't use a 50 w.p.c. receiver to drive Quads, or ribbons. Pairing the right amp with the right speaker ( or right headphone amp with the right headphone ) will make the headphones work to their best potential and bring out the best performance from them.

3: You can vary the "sound" of the headphone amp by swapping OP AMPS, tubes, power supplies, etc. This means that you can tweak the sound and performance even further to your liking, to your particular headphones, and to your source equipment. Using Class A amp circuit, tubes, OP AMPs, or any combination means more precise and accurate control of the headphones as opposed to a "one size fits all" design of a built-in headphone jack on a receiver.

4: Placebo effect. Personally I view the placebo effect as what a person would hear ( or not hear ) when he has no true frame of reference for comparison. Basically, if you never made a direct comparison, then how can you make an accurate judgement? It's true that many people will WANT to hear a difference since they paid good money for their gear. But there are also many, many more people who have made more accurate and truthful claims based on experience, comparisons, and a willing to learn by being non-judgmental. The the majority agree that, at least in this topic, a dedicated headphone amp will sound more natural, is a better combination, and will bring out the performance of the headphones much better than a receivers headphone jack.

5: Looking pretty in pictures. I've owned many gear that while it looked awesomely pretty, sounded like total garbage. Just because it looks pretty in pictures is no guarantee it will perform decent. I do believe, however, that posting pictures of your gear will give more validity and weight to a persons opinions and comments simply because of the gear that he owns. Saying you heard a friends gear a few years ago is not the same as saying you own the gear and hear it on a daily basis when making a comment.

Hey, we all have opinions, and we here at AK want to hear everyones opinion. But we don't want to hear negative opinions with no real-world facts. To blanket all headphone amps as a complete waste of money is a pretty bold statement, and unless you want to avoid the voices of real-world users coming at you from all sides with "their opinions" at being offended that you just told them they spent their hard earned money on garbage you'd better be ready to accurately back up your statement.

---Peace--

Jimmy
 
With a 1st class FCC license (1974) and almost 40 years experience repairing electronic equipment.................................

In MY opinion, a dedicated headphone amp will almost always beat out a headphone jack from a receiver.

Steve
 
I think that means it beats the grado in sound quality, which makes completely sense, while there 'phones are great, the RA-1 is a gyp. It's about $350 and for that you get a couple big-ish caps and a single op-amp. The little dot, despite being around $120 has a op-amp driver stage, a tube buffer, and a transistor output. You can mod the little dot as well, which is impossible in the grado from what i've seen. The valve circuit does just add distortion, though the ability to model tubes is more than worth it's slight distortion figures (which I believe is probably far less than a receiver's attenuated output).

You say 'sound quality' although the Grado is only an opamp it doesn't colour the sound. The tube and opamp rolling you mention colours the sound so that would just make it of personal preference to the listener not better 'sound quality' as the colouration would not be present on the original recording ??


Well first I'm certainly not bashing anyone. But let me offer some valid points of view coming from someone who also has many years of repairing, modding, testing, and building electronics.

1: A headphone amp connected to a main amp will (should) better the sound from a dedicated headphone amp.
I believe this can never be true. First you assume everyone has a receiver ( since these are the only gear that have built-in power amps ). But if we have separate pre and main amps then there is no way to have the amp "resistered down" to a headphone jack. A preamp will have to have it's own dedicated headphone amp circuit designed, and the chances of the manufacture paying as much attention to that circuit over the rest will most probably be very little.

I didn't assume everyone had a receiver actually I don't know anyone with a receiver, I think I actually said if you only had certain types of equipment you would benefit from a headphone amp, BUT if you have a good quality Hi-Fi amp you are not going to necessarily notice a big difference

2: Having a power amp resistered down to a headphone jack presents many problems. First you will not be able to adjust the headphone amp impeadance to match specific headphones.

As you can't with most headphone amplifier's

3: You can vary the "sound" of the headphone amp by swapping OP AMPS, tubes, power supplies, etc. This means that you can tweak the sound and performance even further to your liking, to your particular headphones, and to your source equipment. Using Class A amp circuit, tubes, OP AMPs, or any combination means more precise and accurate control of the headphones as opposed to a "one size fits all" design of a built-in headphone jack on a receiver.

Most amplifiers have tone controls;) I also wonder how many people including yourself would hear these tweaks in a ABY situation.

4: Placebo effect. Personally I view the placebo effect as what a person would hear ( or not hear ) when he has no true frame of reference for comparison. Basically, if you never made a direct comparison, then how can you make an accurate judgement? It's true that many people will WANT to hear a difference since they paid good money for their gear. But there are also many, many more people who have made more accurate and truthful claims based on experience, comparisons, and a willing to learn by being non-judgmental. The the majority agree that, at least in this topic, a dedicated headphone amp will sound more natural, is a better combination, and will bring out the performance of the headphones much better than a receivers headphone jack.

5: Looking pretty in pictures. I've owned many gear that while it looked awesomely pretty, sounded like total garbage. Just because it looks pretty in pictures is no guarantee it will perform decent. I do believe, however, that posting pictures of your gear will give more validity and weight to a persons opinions and comments simply because of the gear that he owns. Saying you heard a friends gear a few years ago is not the same as saying you own the gear and hear it on a daily basis when making a comment.

I just buy and sell gear not listen to other peoples as you have to live with it for a while, even now I can put my Grado's on one day and I am in musical heaven other days they sound tinny and fatiguing.

Hey, we all have opinions, and we here at AK want to hear everyones opinion. But we don't want to hear negative opinions with no real-world facts. To blanket all headphone amps as a complete waste of money is a pretty bold statement, and unless you want to avoid the voices of real-world users coming at you from all sides with "their opinions" at being offended that you just told them they spent their hard earned money on garbage you'd better be ready to accurately back up your statement.

I think I have said in a couple of posts it is down to personal personal preference, it seems you are the only one who is offended. I'm sure your little dot sounds very nice as do many Hi-Fi amplifiers.

---Peace--

Jimmy
 
With a 1st class FCC license (1974) and almost 40 years experience repairing electronic equipment.................................

In MY opinion, a dedicated headphone amp will almost always beat out a headphone jack from a receiver.

Steve
be interesting to see if you get a load of posts about making a blanket statement.....I am guessing you won't.
 
You say 'sound quality' although the Grado is only an opamp it doesn't colour the sound. The tube and opamp rolling you mention colours the sound so that would just make it of personal preference to the listener not better 'sound quality' as the colouration would not be present on the original recording ??

The tube rolling does color the sound, I can't dissagree there, it's a well-known fact. However, I went through several pairs of tubes, the stock ones were alright, the Mullards were a bit muddy, and the ones i'm using now are very,very nice military-grade russian tubes, which I don't think add to much color one way or another, they sound extremely balanced. I understand tha it adds distortion and noise, but I think if anyone heard it, they wouldn't be complaining:smoke:

You all too readily assume the Grado amp wouldn't color the sound, yet it has a op-amp, the only difference is that you can't mod the grado;). I replaced the op-amp in the little dot with a Burr-brown 2107, I can assure you it barely colors the sound. I would hazard a large bet the Grado amp colors the sound as well, simply because nothing is perfect, neither is the little dot, but for nearly 1/4 less, I think it's performance is probably pretty close, and it's expandable by the user.

This whole argument is based on opinon, we have no reference to your gear, you could have a $10k amp, which I would expect to sound great through anything. My reference is from a pretty consumer model, good sound, but the headphone jack, and dropping resistors were clearly and afterthought (not just impedance matching)...while it's not something I care much about, how well do you think things sound through a cement power resistor:scratch2:

Here is what I would say; If you have fairly nice headphones, and do a lot of listening, A headphone amp is probably worth it, but only the listener can make that distinction.

As for your last post, gearhound states "in my opinion" as well as "almost always", that's not a blanket statement, and it doesn't come off as agressive as your inital post.
 
I think I have said in a couple of posts it is down to personal personal preference

No, what you said was...

they are a complete waste of money

To speak in absolutes then try to ameliorate with hedging your statement leaves you lacking credibility, at best. Had you simply stated your opinion of HP amps, I wouldn't have responded.

My guess is, among those who have truly listened to both possibilities, dedicated headphone amps will win out ten to one and maybe more.
 
I'm majoring in electronic engineering, there are very basic reasons why a dedicated headphone amp will perform better than a attenuated dropping resistor from a power amp.

QUOTE]

Just curious what reasons there are that a dedicated headphone amp would sound better than a dropping resistor? I can think of a couple possible reasons:
1.) The damping factor is crap. But like I said earlier, I don't know why this would matter to a very small driver like used in a headphone. Also, most of the schematics I've seen for the dedicated headphone amps will have pretty crappy damping factor also. It is a spec you never see for a headphone amp.
2.) If the resistor values isn't correct for the headphone impedance such that the volume of the amp has to be very low, then class A-B crossover distortion would be dominant. But assuming you get the right value, that shouldn't be a concern.

Are there other reasons I'm not thinking of?

I will acknowledge that it should be easier to design a good amp that would drive a high impedance headset to a few milli-Watts than to drive a speaker at tens of Watts, but I don't necessarily see that born out in the schematics I've seen for headphone amps.
I've drawn out the schematic for the LD 1+, and I can tell you it isn't any improvement over a typical amplifier used in a receiver. It is pretty good, but nothing great.

Terry
 
Just curious what reasons there are that a dedicated headphone amp would sound better than a dropping resistor? I can think of a couple possible reasons:
1.) The damping factor is crap. But like I said earlier, I don't know why this would matter to a very small driver like used in a headphone. Also, most of the schematics I've seen for the dedicated headphone amps will have pretty crappy damping factor also. It is a spec you never see for a headphone amp.
2.) If the resistor values isn't correct for the headphone impedance such that the volume of the amp has to be very low, then class A-B crossover distortion would be dominant. But assuming you get the right value, that shouldn't be a concern.

Are there other reasons I'm not thinking of?

That's a lot of it, the damping factor, I think is pretty minimal, not that that stops people from trying to minimize it even more (heck, when I make one i'm probably going to use mosfets just because of dampinging). It's a good idea to minimize, certainly - and you have a good point, you'll almost never see that as a specification

The resistor is a concern, if it was the right value, that would be different, and they aren't really set up to drive the extreme range of headphones, I think the statement earlier was correct, most are set up for low ohms, like around 8ohm, as it seems many older headphones are 8 (both my old pioneers are, anyway). But modern headphones go from 8-600ohms from what i've seen, too much swing for a dropping resistor to make up (though some headphones close to the "value" probably work just fine)

I probably exagerated a bit, I just see it as designing for a purpose, and knowing what the loads are going to be, in a receiver, it's an after thought, 3 components, with no way to adjust, many headphone amps let you select lo and hi gain for different impedances.

I will acknowledge that it should be easier to design a good amp that would drive a high impedance headset to a few milli-Watts than to drive a speaker at tens of Watts, but I don't necessarily see that born out in the schematics I've seen for headphone amps.
I've drawn out the schematic for the LD 1+, and I can tell you it isn't any improvement over a typical amplifier used in a receiver. It is pretty good, but nothing great.

Terry

Yeah, I simply use the little dot as an example because it's what I have and know, i've looked at it, and it isn't too different than a standard push-pull, just specialized for headphones.
 
I'm not voting or anything, but I think egg on toast has made some not too crazy assertions.

A) having the word "Headphone" in an amplifier product cannot make it sound better. Yes, that's a blanket statement, but I'm not squeamish about making it. and

B) there is no law that receivers or power amps have a series resistor connecting their headphone jacks. Many don't use them. You could short them out if you wanted to.
 
I'm not voting or anything, but I think egg on toast has made some not too crazy assertions.

A) having the word "Headphone" in an amplifier product cannot make it sound better. Yes, that's a blanket statement, but I'm not squeamish about making it. and

B) there is no law that receivers or power amps have a series resistor connecting their headphone jacks. Many don't use them. You could short them out if you wanted to.


A) It's not a question about having the word on a product. It's a matter of making a specific product for headphones.

B) If you short of remove the resistors that are meant to lower the wattage from the internal amp, then you would be sending 50 watts, 80 watts, 100 watts - full amplifier power - to your headphones and immediately vaporizing the voice coils.

These 2 reasons alone are exactly the reasons why having a dedicated headphone amplifier a better choice than not. But in the end some people will prefer it, others won't. I believe that if headphone listening is your thing then you will dedicate yourself to getting the best equipment you can, much in the same way if listening to big speakers is your thing then you will purchase the best equipment you can for getting the best sound out of your big speakers.
 
I would like to get a headphone amp when funds allow(who knows when that will be). Till then though the r7 will do and for it's single digit price it's hard to complain. :thmbsp:

And the single digit price is pretty important especially if you don't do a bunch of headphone listening and don't want to invest a pile in the project.
I think there are some nice & relatively inexpensive plans out there for building a tube 'phone amp. Might also be a great way to repurpose some other older tube amps, like the Roberts 770/Akai M8 ones I have here just waiting for a good use, lol :D
 
Back
Top Bottom