alteclipsch
Super Member
I'm finally getting around to finishing my 846b build and have recapped the AS101 crossovers. Both lpads are trashed, so they're being replaced with new 8 ohm parts from PE. I've read that the crossover is the same as the Altec N800K. Per the photo below, it looks like the two old lpads are stacked, with one connection on each shorted to the other. I'm thinking that short is common. New lpad is also shown.
My problem is which of the connections on the new lpad to use and where. Any guidance is appreciated.
My problem is which of the connections on the new lpad to use and where. Any guidance is appreciated.
Attachments
Last edited: