• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

help me understand! part1

Somenut1

I need help!
Bi amp/bi wired. what does each one do and the benefit of doing it. If your amp is bi wired does your speakers have to be bi wired also? Different taste in music. Hershey 1's n/a warfendale 88's Fosgate 4125 amp. how do I know what ohms my speakers are. Will I damage them if I ran them at a different ohm? lastly, what receiver do you recommend to match this set-up. 5.1, 7.1 or a 7.2. All hell while I'm at it. If I go 7.2, should I buy powered subs or passive.
 
Register to hide this ad
Bi amp/bi wired. what does each one do and the benefit of doing it.
Bi amped is two amps two speakers, bi wired is two amps one speaker

If your amp is bi wired does your speakers have to be bi wired also?
Amps aren't bi wired, some speakers are

Different taste in music. Hershey 1's n/a warfendale 88's Fosgate 4125 amp. how do I know what ohms my speakers are.

Look them up online, I am sure you will find the specs

Will I damage them if I ran them at a different ohm?

No, the load (ohms) is determined by the speakers, not the amp. You can damage your amp running speakers that are 4ohm or lower if the amp isn't rated for it.

lastly, what receiver do you recommend to match this set-up. 5.1, 7.1 or a 7.2. All hell while I'm at it. If I go 7.2, should I buy powered subs or passive.

No real advice here to offer. Not really my thing.
 
Bi amped is two amps two speakers, bi wired is two amps one speaker

That's not correct,
Bi-amplification is one speaker (speaker as a whole) with two amps powering it, you can bi-amp any speaker that is 2-way or more, it just has to be configured to do so.

Bi-wiring is connecting the high and low frequency inputs to the same amp, but with separate runs of wire.
 
bi wired speaker is when it terminals for high and low frequency inputs
bi wired amp will have high and low frequency output
bi amp is having 2 amps one driving high and the other driving low .
 
That's not correct,
Bi-amplification is one speaker (speaker as a whole) with two amps powering it, you can bi-amp any speaker that is 2-way or more, it just has to be configured to do so.

Bi-wiring is connecting the high and low frequency inputs to the same amp, but with separate runs of wire.

well if it is two mono amps per speaker or two stereo amplifiers per two speakers.

basically the highs and lows are each powered by their own channel of amplification.
 
That is a good Wiki article....a lot of confusion comes from people getting their definintions mixed up.
 
That's not correct,
Bi-amplification is one speaker (speaker as a whole) with two amps powering it, you can bi-amp any speaker that is 2-way or more, it just has to be configured to do so.

Bi-wiring is connecting the high and low frequency inputs to the same amp, but with separate runs of wire.

Beat me to it. :D
 
I saw a speaker with some kind of jumper to both the positive and negitive post. what does that do?
It kills your amp :D

There is no way in hell the pos and neg were jumpered together if that's what you mean. The jumpers were without a doubt strapping separate pos terminals and separate neg terminals meaning the passive network in the speaker can be split into a HF branch and a LF branch when the jumpers are removed. Otherwise known as bi-wireable/bi-ampable speakers.
 
It kills your amp :D

There is no way in hell the pos and neg were jumpered together if that's what you mean. The jumpers were without a doubt strapping separate pos terminals and separate neg terminals meaning the passive network in the speaker can be split into a HF branch and a LF branch when the jumpers are removed. Otherwise known as bi-wireable/bi-ampable speakers.

yes that is what I mean, so I can instead run 2 leads from my amp to the seperate terminals?
 
yes that is what I mean, so I can instead run 2 leads from my amp to the seperate terminals?
If your looking to bi-wire then yes; two pairs of speaker leads from each channel of the amp connected to the respective speaker's two sets of binding posts with the jumper removed.
 
Back
Top Bottom