Help!! No Sound!!

[chiroman]

I just hooked up my 2 MC275 mono with the C2300. First I hooked up the jumpers from com to com and 16 to 16 (8 ohm Klipsch La Scala) + to 16 and - to com. Balanced cable to R on amp and R on main pre amp, the other amp L on amp and L on main pre amp. I am only getting sound from the right side. Amps are on and working?????
Help
Newbie
Thanks

 

[vinyldavid]

jiggle the cables...and shoulden't the terminals be 8 and common?

 

[chiroman]

The amp manual says for mono 8ohm hook - to com and + to 16ohm.

 

[thisOne]

Did you switch the stereo switch to mono? (Page 12 of the manual)

 

[chiroman]

I switched the mono and balanced on the amp only.

 

[ByteWrangler]

Use the Right input for Mono on both amps.

 

[chiroman]

BINGO Both working-THANKS... Its a bit unclear in the manual. Yes it shows one amp going to right and nothing else! When i get my other speakers I am going to Bi amp. I have the Y connectors for the L R on amp. How do I connect to the Pre? L R main? or R only?

 

[Indy]

Use the Right input for Mono on both amps.

that sounds like it would make sense.

 

[ByteWrangler]

Glad to help. How's it sound?

You don't have to answer immediately. In fact, I'd be surprised to see you here any more tonight!