Help Programming ATMEGA8-16PU

[dennismiller]

I would like to build a "Remote Motorized Volume Pot" that was featured in Elektor Magazine November 2008.

At the heart of the circuit is an ATMEGA8-16PU microcontroller. And at the time of printing one could buy a programmed microcontroller. As far as I can see this option is no longer available.

I have no programming experience or the hardware to do this myself. The ATMEGA8 is still available at Mouser and the code can still be downloaded from Elektor. I have the files.

Is there anyone here willing to flash this microcontroller for me?

I can buy the microcontroller and have it shipped directly to you.

 

[quadtech]

You could try one of the Maine forums like this one - there may be folks not too far from you.

forums.hackmaine.org

There is a seller on Tindie from Bangor - maybe he could help -

https://www.tindie.com/stores/FemtoCow/

 

[grindfix]

I would like to build a "Remote Motorized Volume Pot" that was featured in Elektor Magazine November 2008.

At the heart of the circuit is an ATMEGA8-16PU microcontroller. And at the time of printing one could buy a programmed microcontroller. As far as I can see this option is no longer available.

I have no programming experience or the hardware to do this myself. The ATMEGA8 is still available at Mouser and the code can still be downloaded from Elektor. I have the files.

Is there anyone here willing to flash this microcontroller for me?

I can buy the microcontroller and have it shipped directly to you.

Dennis,

Were you able to build that motorized pot?

Thanks,

 

[dennismiller]

Not yet. I have found someone to program the microcontroller but I have not received it yet. I may just have to try my own hand at programming the chip or go another route.