• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Home theater receiver

balddor

Member
I'm thinking about purchasing a Yamaha RX-V2095 receiver. I will be using it as a 2 channel stereo unit until I can get more speakers. Any thoughts on the Yamaha ? Would hit sound as good as a McIntosh MA6200 ? :scratch2:
 
Register to hide this ad
Yamaha

Yes. I guess I'm getting lazy and want a remote control so I can change the volume from my Lazy Boy or for a sleep timer :boring: ..... I won't get rid of the Mac. :no: I just want members opinions.
 
Go with a denon. IMO they are better than most yammies at the same price (my opinion only) also, they have an awesome 2-channel section too. What speakers do you plan on running?
 
IMO Most Yammies are gutless compared to Pioneer or Denon.

You Can get a NICE New Pioneer for around $300.


Denon....yeah, maybe. Pioneer?

Eh...I woudn't put too much money on that bet. Like any though, they have their good models and lesser models.

Actually, in the last test report I read, Onkyo came closest to its rated power with all channels driven. There wasn't a Denon in that test though, from what I recall it was Pioneer, Yamaha, and Onkyo.
 
If the OP Just wants somthing that sounds good with a Remote, and doesnt make your ears bleed, then just about anything in the $300-500 Will work.
 
If the OP Just wants somthing that sounds good with a Remote, and doesnt make your ears bleed, then just about anything in the $300-500 Will work.

Ditto. $500 CAN actually get you quite a bit in a HT receiver. I know this from experience with middle-line receivers (my main system has one. coulden't be happier)

Not dissing any yamaha fans but from what ive seen they ARE pretty gutless (especially the Xformer!) compared to denons and pioneers in the same pricerange (the pricerange being around 3-5 hundred bucks) :thmbsp:
 
Ditto. $500 CAN actually get you quite a bit in a HT receiver. I know this from experience with middle-line receivers (my main system has one. coulden't be happier)

Not dissing any yamaha fans but from what ive seen they ARE pretty gutless (especially the Xformer!) compared to denons and pioneers in the same pricerange (the pricerange being around 3-5 hundred bucks) :thmbsp:

Really?

Again, the last reviews I read included a 95wpc Pioneer that did 35wpc with all channels driven.

The Onkyo of comparable price in the comparison was rated 90wpc and did 78wpc with all channels driven.

Of course, neither are Yamaha, but all I'm saying is don't put your money carte blanche on every Pioneer being kick ass. Some definitely are not compared to others in the same price category.

Don't get me wrong, I've got nothing against Pioneer...only generalities that may not be true. Just about all brands have their stars and their stinkers.
 
Last edited:
Really?

Again, the last reviews I read included a 95wpc Pioneer that did 35wpc with all channels driven.

The Onkyo of comparable price in the comparison was rated 90wpc and did 78wpc with all channels driven.

Of course, neither are Yamaha, but all I'm saying is don't put your money carte blanche on every Pioneer being kick ass. Some definitely are not compared to others in the same price category.

Don't get me wrong, I've got nothing against Pioneer...only generalities that may not be true. Just about all brands have their stars and their stinkers.

Well I haven't heard many onks. But my brother owns one and he's happy with it. As for denons, I have a denon running 4 cerwin vega towers and it seems to be giving them the power they need. And it sounds good as well.
 
I am a yamaha owner,
im very happy with mine but i agree with everyone else,
they are GUTLESS.
i would recommend an onkyo.
 
i have the 2092, and gutless it is not. i would agree most of the newer ht receivers are, including another Yamaha i had for a short time. the 2095 is probably plenty powerful for stereo use.
 
If it ain't broke, don't fix it. :D

You could upgrade to a Mac with a remote. :scratch2: I'm surprised the 6200 doesn't have a remote. The 6300 & 6600 have a remote.

I have a Denon 3200. The reason I'm not currently using it in my main system, is that I upgraded to Mac.
 
Last edited:
I had a cheap Yamaha before I got my Onkyo 805, and it sounded very good. Of course, the Allison speakers may have had a little to do with that. :)

Denon makes very good gear, but at the same price point as the other brands (Onkyo, Yamaha, Pioneer), it will have less features. For the same HT features as the others (decoding HD audio formats, number of HDMI inputs, etc.), Denon will cost a good bit more (from what I've seen anyway).
Good luck!
 
This appears to be an old thread but I'll add my .02.

It would not sound as good as the Mac....period.

I have a Yamaha HT receiver and it does a fantastic job with HT...not so good with 2 channel music. I have a pretty good frame of reference relative to HT having owned Onkyo, NAD, Marantz, Rotel, and Denon...The Yammie is as good at HT as any of the best relative to mass market AVR's. I have only limited experience with the Pioneers...but I would only look at the Elite line.
 
I have a Yamaha RX-V2200 6.1 Ch amp (Top ART) and I love it.

I also own a Onkyo TX-SR 805 7.1 Ch amp and I love it as well.

I think the Onkyo and the Yamaha are both great amps. The Yamaha is no slug. I use The Yamaha in my living room for 2 ch music. It runs a set of Sound Dynamics SD30S three ways (12" woofers) like a charm. It is loud and clean. Clean enough to totally enjoy and loud enough to piss off the neighbours.

later,
ken99
 
I have owned Yamaha stuff in the past and I liked it.The only thing I would be concerned about as far as there new stuff is that it is manufactured in Malasia.Kinda seems like there masmarketing stuff in third world sweat shops so it can be built cheaper.Does this mean A difference in quality and longevity?Any feedback on this???
 
How new? Don't know if this one was one of those or not:
I had a Yamaha HTR-5940, that I bought just over a year ago, and I liked it a lot. The quality was very good, for a cheaper receiver. It just didn't have all the bells and whistles the new ones have. I sold it to my wife's brother-in-law, when I got my new Onkyo 805. He likes it a lot too. It had their two year warranty, and I never had a second of trouble with it. The only thing I didn't like, and all Yamahas have it, is the amber color text, in the receiver's window. But that's a small thing.
 
I'm thinking about purchasing a Yamaha RX-V2095 receiver. I will be using it as a 2 channel stereo unit until I can get more speakers. Any thoughts on the Yamaha ? Would hit sound as good as a McIntosh MA6200 ? :scratch2:

Balddor:
I disagree with most of the "bash" posts against this Yamaha, mainly because this was a flagship unit in its time, and it is simply not comparable with most lesser Yamahas. Yamaha made HT units for a broad spectrum of price points, and few are as highly featured and powerful (100wpc x 5). The Yamaha's dynamic power rating is impressive at 320w into 2 ohms (it has Yamaha's famous low impedance drive circuitry to handle virtually all loads and a wide variety of speakers).

This unit has discrete power transistors rather than IC chips in the amp section, excellent DSP programs, digital switching capability, and Yamaha's typical very low THD ratings. Anyway, you cannot go wrong with most any of Yamaha flagship models from any era. Here is one review I found on this unit...

http://www.avrev.com/home-theater-av-receivers/av-receivers/yamaha-rx-v2095-receiver.html
 
Yamahalic,

Thanks for your insight on the RX-V2095 and I agree with you on the Yamaha flagship models. :yes: I ended up with the RX-V1, and to me, it sounds just as good as my MA6200. Right now I'm using the Yamaha as a 2 channel stereo until I can gather enough $$$$ ( without the wife bitchen @ me ) to get rear and center speakers. As for the bright or so called harsh highs, not there on my BIC Venturies. Oh sure I could crank the treble all the way up but my setting is around 2 o'clock. Most of the time I have the RX-V1 in the direct mode bypassing the tone controls all together. Plenty of power, looks great, sounds great, weighs a ton but built to order. The RX-V1 also looks good with my other Yam equipment. :thmbsp:
 
Back
Top Bottom