• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

jbl l65 with L300 midrange?

arnoldo

New Member
Hello,

Would like some advice on how it would sound to make custom speakers with the tweeters from a JBL L65, midrange from a JBL L300, and the woofer from a JBL L65. And would it be ok to use the crossover from an L65?

I have a cool, old, Curtis Mathis stereo console that I want to customize with vintage JBL drivers. My original plan was to use JBL L65 components (I already have the tweeters, midrange, and crossover from an L65). But since I'm buying each driver individually, I've read that the midrange driver on the L65 isn't that great, and that an L300 is better. I can't fit the L300 woofers otherwise I would go for a full L300 setup.

Any advice on how set this up or even on other setup ideas that would go with the 077 tweeter? Can't fit bigger than 12" woofer.

thanks
 
Register to hide this ad
If I were to try any other driver it would be the mid out of a L 100 the alnico magnet might be worth a try........Never could understand why the L 65 didnt use this ?
 
Sure - why not build the crossover for the old 4333 (Pro version of the L300) -
you can get the 2312 horns and 2425 drivers for your mids ...
Use them with the Slot tweeters and get a decent woofer to cover the low end ...
Some folks don't like running JBL exponential horns under 1200Hz but
if you use the long horns (instead of the LE85s) maybe you could live with an 800Hz crossover point on your smaller woofers..?

And before you ask - 3133 Equivalent circuit can be found here over on the Lansing forums:
http://www.audioheritage.org/vbulle...0-equivalent-bandbass-circuit&p=1042#post1042

Its what I run My L200 custom 3-ways with ...


Hello,

Would like some advice on how it would sound to make custom speakers with the tweeters from a JBL L65, midrange from a JBL L300, and the woofer from a JBL L65. And would it be ok to use the crossover from an L65?

I have a cool, old, Curtis Mathis stereo console that I want to customize with vintage JBL drivers. My original plan was to use JBL L65 components (I already have the tweeters, midrange, and crossover from an L65). But since I'm buying each driver individually, I've read that the midrange driver on the L65 isn't that great, and that an L300 is better. I can't fit the L300 woofers otherwise I would go for a full L300 setup.

Any advice on how set this up or even on other setup ideas that would go with the 077 tweeter? Can't fit bigger than 12" woofer.

thanks
 
Last edited:
Heather nailed it. The 2312 horns will be a bit spendy. 2425's are plentiful, relatively inexpensive, and a drop in replacement for the much more costly LE-85. If you can find aluminum dias, they will sound better but might not last as long.

BTW, set up correctly and L-65 can be absolute magic.
 
Last edited:
2425's sound great. Been using them since 1985. You may need to pad them down somewhat to better match the stock woofer. You'll have to experiment and modify the cross over.
 
thanks for the input guys. The 2425's seem like a cost effective upgrade I'll look into more, although I'm a little worried I might be getting in over my head with trying to mess with crossovers, I'm not very experienced at this. I think I'll pass on the other expensive models.

One other question, I don't have the 12" woofer yet, although I'm keeping an eye on ebay for L65 woofers. I know that there were 3 models made, the 126a, 122a, and 129h. Are there any other JBL models that would be equivalent I could look for?

Thanks again.
 
thanks for the input guys. The 2425's seem like a cost effective upgrade I'll look into more, although I'm a little worried I might be getting in over my head with trying to mess with crossovers, I'm not very experienced at this. I think I'll pass on the other expensive models.

One other question, I don't have the 12" woofer yet, although I'm keeping an eye on ebay for L65 woofers. I know that there were 3 models made, the 126a, 122a, and 129h. Are there any other JBL models that would be equivalent I could look for?

Thanks again.

Depends on your cabinet size. Personally, I'd skip all of the shallow cone JBL's and move right up to the 2214H that was used in the L100T/L100T3 and 4425 monitors. More modern driver with deeper cone and plenty of excursion and power handling, easy to refoam too and no rising midrange to worry about. Likes to work in a ported cabinet like the L100T so model the port after that.
 
One other question, I don't have the 12" woofer yet, although I'm keeping an eye on ebay for L65 woofers. I know that there were 3 models made, the 126a, 122a, and 129h. Are there any other JBL models that would be equivalent I could look for?

JBL's recommended replacement is the 128H-1 and I believe it would be an improvement in the bottom-end.
 
Nobody mentioned the lens that needs to be used with that horn. That will require another 4 inches of grill in front of the horn.
 
Back
Top Bottom