I'm fortunate enough to have found the correct components to build a DIY JBL M2 and would like to use my MC2155 on the horn section. The only problem is the drive/crossover combination is 20ohms. Does anyone have any suggestions on what to do since the highest tap is 8ohm. I do have a MC2100 that I could use also.
JBL M2 and Mcintosh
- Thread starter srm51555
- Start date
Register to hide this ad
exhippy
I use to have long hair. Now I'm lucky to have any
Your talking this M2 monitor? Damn! These things are very sweet! almost bought a pair of demos including the Crown amps, but that meant giving up the McIntosh amp. Didn't want to do that, so I settled on the 4365 monitors.
www.jblpro.com/www/products/recording-broadcast/m2
Click on M2 mid-page.
www.jblpro.com/www/products/recording-broadcast/m2
Click on M2 mid-page.