Jensen speaker ID

[SFBayArch]

Can anyone identify the Jensen 2 way coaxial model number?




Thanks!

 

[SFBayArch]

 

[malden]

Should be in here somewhere...

http://www.hifilit.com/hifilit/Jensen/Jensen.htm

 

[SFBayArch]

Thanks, I'll see if I can make a visual cross reference. Though it appears that the speakers in my pics are missing the magnet bell housing.

 

[SFBayArch]

Having no luck, especially since I can't see the front of the speakers

 

[drbiggles]

Hey,

I see some numbers on the basket frame, underneath the magnet, to the left, where it screws into the baffle. I have a pair of 1957 Jensen woofers that have their model number stamped in the same place.

Biggles

 

[RWood]

I was googling the HF driver R-106 and came up with a reference to ST 875 H222. Following that, it looks a lot like the ST 875 H222 in this post
Here's a pic of that speaker which, if not for the bell cover, lots a lot like yours. Like Dr B said, the magic numbers are stamped on the frame, obscured in your pics.

 

[GordonW]

That does look a lot like an H222 without the bell. Having rebuilt H222s, I can say they look like the OP picture, with the bell removed.

Regards,
Gordon.

 

[SFBayArch]

Thanks, Biggles, RWood & Gordon
Glad to hear they may be H222's - they'd be a great match for my Sherwood S-5000 7189

 

[SFBayArch]

Based on the numbers stamped on the basket perimeter, these are Jensen H225 C6.124-2. Which leaves me baffled - pun intended

Not familiar with H225....can anyone offer an opinion?

 

[HyKlas]

Could just be the model number for an H222 without the bell. A factory install of some kind... What are the cabs?

 

[SFBayArch]

Could just be the model number for an H222 without the bell. A factory install of some kind... What are the cabs?

Thanks! The cabinets are part of an AcoustiCraft console

 

[CopperWizard]

If you Google Jensen h225, a picture shows the driver front and back. Looks like it is a Jensen h222 without the back made for the Japanese market. The website (gzhifi) doesn't come up.