B_Karl
New Member
Hi,
I'm struggling a bit with how to try and integrate the Schiit Loki Mini+ into my preamplifier enclosure (under construction). The Preamp will use the Neurochrome components and I already have their Preamp Power supply which provides ultralow output noise +/-12VDC outputs. I'm trying to get some advice on where to connect that output directly to the Loki circuit board so that I do not need to use their external wall wart that supplies 15VAC. It's not that I dont think their wall wart is OK. It's just that I don't want to provide an external 15VAC power supply input to my preamp (which already have a 115VAC input) and I also do not want to integrate a potentially noisy wall wart inside my enclosure. I'm not so good with understanding circuitry (but I do know how to solder). And I really want to eliminate that wall wart. Any advice would be welcome!
I'm struggling a bit with how to try and integrate the Schiit Loki Mini+ into my preamplifier enclosure (under construction). The Preamp will use the Neurochrome components and I already have their Preamp Power supply which provides ultralow output noise +/-12VDC outputs. I'm trying to get some advice on where to connect that output directly to the Loki circuit board so that I do not need to use their external wall wart that supplies 15VAC. It's not that I dont think their wall wart is OK. It's just that I don't want to provide an external 15VAC power supply input to my preamp (which already have a 115VAC input) and I also do not want to integrate a potentially noisy wall wart inside my enclosure. I'm not so good with understanding circuitry (but I do know how to solder). And I really want to eliminate that wall wart. Any advice would be welcome!
Attachments
Last edited: