• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Looking for Engraved 2245 Faceplate

2245Engraved

New Member
Hi, I am new here and I have a question for the group. First I might be posting in the wrong place because I'm looking for a part. I just bought a 2245 that has an engraved champagne faceplate, gold chassis, black speaker terminals etc. The receiver was not double packed when shipped to me and it arrived with bent corners. If anyone knows where I might mind either a dead 2245 with an engraved faceplate or just the faceplate itself (yea, I know good luck) I would love to hear from them!!

I look forward to a long relationship here!

Craig
 
Register to hide this ad
Welcome to AK. The seller/packer needs a good whipping because that unit is rare.

You can watch ebay, but as you probably know these untis go for a premium. I think you might have a tough time finding a dead one or especially just a faceplate.

It's been discussed here how to repair bent corners, how bad is the damage?
 
Not to hijack the thread, but I have suffered two different 240 amps with faces bent from bad packing (one was an black face). I, also, would love to know if anyone has some practical suggestions for straightening them out. I'd imagine it would involve heat shrinking and careful metal work, but I'm sure someone has some informed ideas.
 
2245 Engraved Bent Corner issues

Thanks for the welcome guys, I will try to post my pictures. I am looking at using a vice with a cloth and wood blocks. I know I can get them straight what will happen is the anodized finish is going to be deformed. Does anyone have any tips for touching up scratches? Also it occurred to me the letters could be painted white if I took the faceplate to black.
 

Attachments

  • bottom right and side.jpg
    bottom right and side.jpg
    70.3 KB · Views: 96
  • Left side wrap off.jpg
    Left side wrap off.jpg
    88.6 KB · Views: 116
  • Top Left NOT covered by bubble wrap when opened.jpg
    Top Left NOT covered by bubble wrap when opened.jpg
    87.8 KB · Views: 92
Take the plate off and take it to a machinist to straigten it with a press, a vice and wood won't do shite. If you want it done right and since it's a rare item have it done by a pro, shouldn't cost much.
 
Welcome to AK, sorry this happen to you.

For what you payed for it you should of received it in 100% condition. Hope you are getting a refund for the sub standard packing. This was a poor job in packing, looks to me the carrier is not going to be responsible. Unless the box had damage in the areas effected.

Figure on getting another face plate because the straightening will never look as good as before it was shipped.
 
Opinion

The receiver works all lights replaced. Pre / Post jumper board was cracked. I paid 423.00 shipped, we are settling on me keeping it for $150.00 Is this something I should do? Overall the unit is fair inside and all the pots seem fine and clean (no noise from volume etc) just the bent plate - ruined my weekend. I knew as soon as I saw the single box packing I was screwed. For $150.00 may let it go for now. I will post pics of corner rehab. I also bought a wood case elsewhere that is in really good shape.
 
It works fine and another panel can be found sometime or another. But you never know. Right now how much could you sell it for? That is what you need to decide. Then pay them less then that!



Barney
 
The receiver works all lights replaced. Pre / Post jumper board was cracked. I paid 423.00 shipped, we are settling on me keeping it for $150.00 Is this something I should do? Overall the unit is fair inside and all the pots seem fine and clean (no noise from volume etc) just the bent plate - ruined my weekend. I knew as soon as I saw the single box packing I was screwed. For $150.00 may let it go for now. I will post pics of corner rehab. I also bought a wood case elsewhere that is in really good shape.

Man thats a premium price and should of had premium packaging, guess the seller didn't know the hazards of shipping, they treat packages like footballs. Claim it and see if you can find another plate.
 
It makes me sick to my stomach to see a rare and beautiful piece destroyed due to careless packing. It sounds like the seller had integrity and made it right, however. I wish you the incredible luck you're going to need to find a replacement faceplate!
 
Welcome to AK and sorry for the misfortune.

Seeing as you already have a wood case, try straigtening the corners and then slide it in the case. I don't think staightening it will look that good by itself naked but inside the recessed case, it might mask the damage enough. At least try it.

You could keep it as a donor and look for another one and then again, you might get really, really lucky and run across another faceplate. These are really rare and I would bet you would get in a bidding war and it wouldn't be cheap. Another bet is that a lot of people with even a normal 2245 would love to buy an engraved faceplate to put on theirs, so the odds of salvaging this one aren't good.

Do the best you can with it then decide if it's a keeper. Me? Unless it ends up "good enough" in the wood case and the seller/shipping agent refunds a lot of the money, I'd look for another. Good luck.
 
I know I can't post links in here, but there is currently a champagne engraved "2445" on the auction site right now for $249 BIN OBO. You could pay close to that for the faceplate alone....
 
I know I can't post links in here, but there is currently a champagne engraved "2445" on the auction site right now for $249 BIN OBO. You could pay close to that for the faceplate alone....

That "2445" in the title will have many looking for a "2245" miss it.

You could buy that one, Switch faceplates, then resell it.

Rob
 
2 years ago I bought a 19 in good shape.
Take a look what I got:



So I was not satisfied. Therefore, I have used these tools:



And after a few hours:



Not bad, or?!

And don´t worry, in the meantime I ´ve cleaned the faceplate. :D

If you need help ... :beerchug:
 
Some people are so clueless when it comes to packaging things. I once had a guy tell me he was going to buy two new pillows to wrap a receiver in that I won off of ebay. :sigh: I told him to package it properly or I wasn't going to pay for it.
 
The best packing I have seen is home depot styrofoam house insulation sheets used in double boxes. Stuff works great. I had a heavy amp shipped to me that was in mint shape going into the double boxes and it can out of the boxes looking like new.

I also ask the sell to take pics of the unit in the boxes. I do the same when I ship.

Jk
 
Finished the corners & in the case

Ok Does anyone know how to restore the Brushed look? I went a bit too far in a corner after I straightened the corners. I took a Dremel to it and it smoothed away some shine (bottom right) Other than that it does look pretty good in the cabinet.
 

Attachments

  • front side view small.jpg
    front side view small.jpg
    66.6 KB · Views: 68
Back
Top Bottom