MA6100 Bezel Measurements

[leosagna]

Could a kind MA6100 owner please take some measurements of the bezel around the selector buttons for me? I'm in the process of restoring my first Mac. Externally the unit is it pretty great shape, except it's missing the bezel around the buttons. My wallet is a bit light from getting a new volume control from mac parts but I have access to a laser engraver through a family member and should be able to make a semiprofessional replacement myself.
Below are the measurements I need with a corresponding CAD drawing attached.
If anyone can give me any of these measurements it would be greatly apprieciated and I would follow up with how it turns out!
Thanks!

A- Bezel Height

B- Bezel Length

C- Border Thickness

D- Button Slot to Top

E- Button Slot to Bottom

F- Button Slot to Left Side

G- Button Slot Length

H- Button Slot to Right Side

I- Button Slot to Headphone Jack

J- Headphone Jack Diameter

K- Headphone Jack to Right Side

L- Headphone Jack to Top

M- Headphone Jack to Bottom

 

[leosagna]

PS: in case anyone was wondering. The font I used for the lettering is "Tw Cen MT Condensed". Possibly bold depending on what you're using it on. I must have spent an hour googling to no avail (besides numerous gothic results for the Mc logo) and ended up just scrolling through all the fonts until I found it. It's not perfect, the spacing of the letters isn't right, but the font is pretty darn close!