Can anyone confirm that the service manual and/or schematic are correct? My 1060 project has a two bladed Nema style 1-15P plug on it, but it looks inside like it is wired for 220V based on page 7 of the service manual.
Also interesting is that the schematic and page 7 disagree somewhat. The black wire on the schematic is brown on page 7, and the soldered in yellow wire (from the switch) is connected to the black lead to the transformer while the yellow lead from the fuse has a ring terminal and on mine was screwed into the terminal to the blue transformer lead.
Do any of you have a photo of your terminal block that you could post showing how your 120V 1060 is configured?
Also interesting is that the schematic and page 7 disagree somewhat. The black wire on the schematic is brown on page 7, and the soldered in yellow wire (from the switch) is connected to the black lead to the transformer while the yellow lead from the fuse has a ring terminal and on mine was screwed into the terminal to the blue transformer lead.
Do any of you have a photo of your terminal block that you could post showing how your 120V 1060 is configured?
