• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Marantz 18 Wood Case

cabsodyinblu

New Member
Hello AK!

First time posting on here, I’m wondering if anybody has the dimensions for the elusive B18-O or WC-9 case for the Marantz 18. These cases hardly pop up on the ‘bay so I figured I might as well try my hand at making one from scratch for my 18.

Anybody got any leads? :music:
 
Register to hide this ad
Joe model 18 cabinet.jpg
Hello AK!

First time posting on here, I’m wondering if anybody has the dimensions for the elusive B18-O or WC-9 case for the Marantz 18. These cases hardly pop up on the ‘bay so I figured I might as well try my hand at making one from scratch for my 18.

Anybody got any leads? :music:


AK member Asaalah made this one for my Model 18. It's very nice!
 
Blue, if you still have the model 18 and case, could you give me the inside opening dimensions of the case? I have a line on one that is 18" X 5 3/4" not sure the depth but I'd like to know how yours matches up. Joe has done a few fine cases for me so its nice to know he makes one for the 18. I just got an original case for my 19 as well.

Greg
 
Blue, if you still have the model 18 and case, could you give me the inside opening dimensions of the case? I have a line on one that is 18" X 5 3/4" not sure the depth but I'd like to know how yours matches up. Joe has done a few fine cases for me so its nice to know he makes one for the 18. I just got an original case for my 19 as well.

Greg
Hi Greg. Yes, I still have them.

Just measured:
Inside dimensions: 19 1/4" x 5 7/8" . The case in not a sung fit, leaving ~ 3/8" clearance on the 5 7/8 H & ~ 3/4" on either side. Also, the o/s depth on mine is 15 3/8". I'm using banana jacks & plugs, so they do protrude beyond the case a bit.

Steve
 
Very helpful, thank you. I'll grab my 18 and measure its chassis width and faceplate width to see how that compares.
 
Back
Top Bottom