Marantz 2238 Help Needed

[Joe Gregory]

I am restoring a 2238 and have an issue I could use some help with. The wires to the tone control board (PE01) are completely missing and I am having trouble reading the schematic. Can someone please tell me where the wires from JE01 through JE07 are connected at the opposite end? The wire colors would also be helpful. Thanks very much. I'm at a dead end.

 

[petehall347]

je01 to 250k pot not sure if vol or balance
je02 to that same pot
je03 ground
je04 to j727
je05 ground
je06
je07
je08 ground
those 2 seem to go to that 250k pot .

 

[bryans12v]

Jeo6 to jh12
Je07 to jh14

Those single strands are very fragile. Be careful.

 

[Joe Gregory]

Thanks for the help, folks. I'll let you know how it goes this weekend.