I am still getting to know the device, gathering information, and preparing for some more serious tasks in the future. In the meantime, I’ve ordered light bulbs and cleaning sprays, and I’ve picked up some vellum paper. I’m waiting for them to arrive so I can tackle the lighting.
In the meantime, I’ve been working on the plastic tuner pointer needle because is broken. Since the shipping cost on eBay is higher than the item itself, I’ve decided to make one myself...
I’ve put in a cardboard prototype—which I used to get the dimensions right—and now I crafted next version out of acrylic.
It wasn't easy. The first attempt—it snapped right away; the second—it snapped at the end... Third time's the charm... success!
It’s a bit thicker than the original (for fear of it breaking), and for now, it lacks the "T-shape" at the end where it fits into the housing. I’ll add that later using acrylic glue, though it’s already holding very firmly. All that’s left is polishing and a light test (once the bulb arrives).
In the meantime, I’ve been working on the plastic tuner pointer needle because is broken. Since the shipping cost on eBay is higher than the item itself, I’ve decided to make one myself...
I’ve put in a cardboard prototype—which I used to get the dimensions right—and now I crafted next version out of acrylic.
It wasn't easy. The first attempt—it snapped right away; the second—it snapped at the end... Third time's the charm... success!
It’s a bit thicker than the original (for fear of it breaking), and for now, it lacks the "T-shape" at the end where it fits into the housing. I’ll add that later using acrylic glue, though it’s already holding very firmly. All that’s left is polishing and a light test (once the bulb arrives).