Marantz 2275 Volume Pot Potentiometer Control 250K Wire Circuit Needed

[infraTest]

I purchased a new volume pot potentiometer control 250K from eBay to replace the old one in my Marantz 2275. Before desoldering I did mark the wires terminals with color pen for resoldering these wires back. Unfortunately these marks disappeared and I cannot tell which wire to be the right one for connecting.
I could not find the wire connecting way in the circuit.
It would be appreciated if anyone can take a photo or make a drawing of your Marantz 2275 to show how these wires are connected to the volume pot potentiometer!

Thanks and best regards

 

[petehall347]

try blacks to where they connect together on the pot . reds towards the front .white to the back . if it doesn't work properly swap them over but leave black where they are and keep reds and whites same pot track.
hope that isnt too confusing

as a note reds are right channel .white is left and black is ground .

 

[petehall347]

 

[onebigmistak]

How did this volume pot work for you? I've founded a broken volume pot in my 2275 and am considering purchasing from one of the ebay reproductions.