• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Marantz 4070 quadradial & 2252 connecting

vinylblare

vinylblare

New Member
1444897-marantz-4070-asis.jpg View attachment 1160306 1444897-marantz-4070-asis.jpg 689105-marantz_4070_integrated_amplifier.jpg View attachment 1160306 Hi all , just picked up 4070 quad and want to connect my 2215 to it so i can run the tuner . What is the correct way of connecting ? the 4070 has a tuner input so am I to use that ?

As per usual this didn't come with user manual and ĺ cannot find it online , hifi engine just have the service manual.

Thanks in advance .
 
Last edited:
Register to hide this ad
vinylblare said:
Hi all , just picked up 4070 quad and want to connect my 2252 to it so i can run the tuner . What is the correct way of connecting ? the 4070 has a tuner input so am I to use that ?

As per usual this didn't come with user manual and ĺ cannot find it online , hifi engine just have the service manual.

Thanks in advance .
Click to expand...

Show us your inputs on the back please.
 
Are you attempting to run 4 speakers in quad setup?

The reason I ask is because the 2252 has almost double the power output. Youre actually going backwards with the 4070 unless your intention is quad.
 
Yes apologies , I'm infact going to run my 2215 in to it . My mistake, I've got a few kicking about .
I'll edit my original post and upload a rear shot tomorrow morning .
Thanks for your replies
 
Well I've uploaded a couple of stock rear shots , everything i run through the 4070 sounds really sweet but i would like to run the 2215 in to it purely for the tuner . Am i ok running it in to the tuner input or is that going to be too much for it ?

I'm not looking at using it for it's quad capabilities at this time .

Thank you
 
If you want to use the preamp section in the receiver, connect all inputs to it and use the pre out to the front main in on the integrated.

If you want to use the integrated preamp section, connect inputs to it (aux, phono) and use tape out 1 on the receiver to front tape in on the integrated.
 
bryans12v said:
If you want to use the preamp section in the receiver, connect all inputs to it and use the pre out to the front main in on the integrated.

If you want to use the integrated preamp section, connect inputs to it (aux, phono) and use tape out 1 on the receiver to front tape in on the integrated.
Click to expand...

Thanks for your help , yes that does seem the best way .

Cheers
 
You must log in or register to reply here.
Back
Top Bottom