Aprabilinea
New Member
Hey Guys
I’ve recently found a cheap 6100 and this guy is well conserved but there’s an annoying hum when connected to energy. I’ve strip it down, changed cables, changed those 0,047 caps and have checked the arm wire to make sure the grounds are correctly. Everything looks fine but the hum is still there. It’s a European grey version bi volt so not sure if could be something on the voltage selection or the motor. Any suggestions on checking?
Thanks
I’ve recently found a cheap 6100 and this guy is well conserved but there’s an annoying hum when connected to energy. I’ve strip it down, changed cables, changed those 0,047 caps and have checked the arm wire to make sure the grounds are correctly. Everything looks fine but the hum is still there. It’s a European grey version bi volt so not sure if could be something on the voltage selection or the motor. Any suggestions on checking?
Thanks