• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Marantz 9s + Marantz 7 combo

kikimasu

New Member
Hi everyone, I'm considering a pair of original Model 9s and a Model 7. Would like some opinions of those who know about these items since they're a big expense. Equipment sounds 10/10 as far as my ears are concerned, no issues there. Cosmetics are very good, I'd say around 8/10. Just want some input about the interiors. I'll attach 1 interior and 2 exterior pic of each. They seem pretty original, with minor and coherent services done.

Serial numbers:
Model 9: 3074 and 3087 (only 13 units apart)
Model 7: 20993

Any tests or things to consider you can recommend are greatly appreciated.

Thanks in advance.
 

Attachments

  • IMG_9557.JPG
    IMG_9557.JPG
    308.4 KB · Views: 54
  • IMG_9563.JPG
    IMG_9563.JPG
    225.6 KB · Views: 52
  • IMG_9638.JPG
    IMG_9638.JPG
    417.5 KB · Views: 45
  • IMG_9566.JPG
    IMG_9566.JPG
    347.6 KB · Views: 43
  • IMG_9588.JPG
    IMG_9588.JPG
    493.4 KB · Views: 43
  • IMG_9598.JPG
    IMG_9598.JPG
    232.3 KB · Views: 42
  • IMG_9607.JPG
    IMG_9607.JPG
    368.9 KB · Views: 44
  • IMG_9612.JPG
    IMG_9612.JPG
    524.5 KB · Views: 60
Register to hide this ad
no 9 experience, have worked on a single 7 so extremely far from an expert. I worked on an 8b with the 7.

I'm seeing new electrolytics in the 7 on the turret board, doesn't look like anything else. The 9 I see new electrolytics on the turret and a couple resistors, nothing else.

Power supply filter caps in both would be a concern just for age, and those bumblebee caps are probably leaky in the 7. I did not mess with the ones in the tone controls since that just seemed like a potential disaster, and leakage there is blocked by other caps so not really a big deal. Check the condition of the shock mounts for the 7 turret board. The ones in the unit I worked on were falling apart and the board was sagging noticeably. Some of that was probably the 60 years it spent with the transit screw in place though. Also check the output voltage of the selenium rectifier in the 7, the usual fail mode is extra voltage drop.

I believe the 160P black beauty caps are a di-film, and the brown are a film type that may hold up OK. Worth checking for leakage in circuit at least if the aim is to keep it mostly original. The bumblebees I took out of the 7 were all at least somewhat leaky but I've honestly never found one that wasn't.
 
Of course, nowhere near as important as the caps, but on the 7 make sure about the condition of the volume and balance pots. The originals are sealed, so forget Deoxit and from experience, it's hard to find replacements that work, fit, and look reasonably original.
 
Back
Top Bottom