Marantz turntable dimenions

[Balaszi]

I'm looking to get a new dustcover for my Marantz 6350Q tt. This seems next to impossible, so I was wondering if a dustcover from another table might fit it.

I figure that that 6300 and the regular 6350 should fit ok, but does anyone have dimensions on any of the other models? Such as the 6100, 6110, or 6200...Will they fit?

Thanks!

 

[gimmieshelter31]

Hi Balaszi,
Do a google or ebay search for proaudioexpress . They probably have one .
And welcome to AK.
Russ

 

[Tuquala]

I have a 6200 dustcover, and will go out to the garage and measure for you. It is with the original base, good hinges, in pretty good shape. I have my 6200 on a custom red oak base, and decided not to mount and use the dustcover.

I will message you shortly!!


Gerry

 

[Stuffcollect]

The model 6100 cover is 13-1/4" x 17" at the contact edge, while the "box" tapers slightly.

 

[Tuquala]

6200 cover is 17"W x 13-1/2"D x 3"H. The W & D includes a very slight lip at the bottom edge. The base itself measures 17-1/4" x 13-3/4".

The cover hinges mount to the base with 3 screws in a "L" pattern, long side down!

 

[Balaszi]

Thanks so much guys!! Love this forum!

 

[gata]

That is so strange. I was just about to ask this exact same question! :yes: I have the exact same turntable. The thing I noticed, though, was that hinges are mounted at different distances. Other covers fit over the works, but the hinges won't match up. I'm gonna go measure now.