• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Mcintosh and Crown

blacker

Active Member
hi,
has anybody tested such combo? currently own A MCintosh MA6200 and thinking of use it as a pre-amp with a Crown dc300 or ps 200/400 to power my Jbl4311b as i start to feel that they can handle/need more power.
any thoughts on this? or any other suggestions concerning power amps are welcome!
thanks
 
Register to hide this ad
I had a PS400, was a very stout amp, Crown used to demo them with the outputs shorted at full-output, I believe stable to 2ohms.

However, I feel that they have a very sterile sound signature, make better LF amps (for bi-amping) or subwoofer amps. On 4312As they were shrill IMO, not a great pairing.
 
thanks for you thoughts Jeff! do you have any other suggestion on to power up my the system (Jbl -Mcintosh) further?
 
No, almost never, but i can feel at lower levels that i want a more energetic sound
went recently to friend with same speakers powered by a 2x100 marantz amp and had better results IMO.
also i have seen several members here and elsewhere suggesting that the ideal power if there is such thing for these jbsl is around 150w
 
No, almost never, but i can feel at lower levels that i want a more energetic sound
went recently to friend with same speakers powered by a 2x100 marantz amp and had better results IMO.
also i have seen several members here and elsewhere suggesting that the ideal power if there is such thing for these jbsl is around 150w
You need to think about what you just said ... a larger power amp won’t provide what you’re looking for.
 
No, almost never, but i can feel at lower levels that i want a more energetic sound
went recently to friend with same speakers powered by a 2x100 marantz amp and had better results IMO.
also i have seen several members here and elsewhere suggesting that the ideal power if there is such thing for these jbsl is around 150w
Your ma-6200 is a fine amp. Turn the volume knob past 60%, and enjoy... If you want better sound, replace the speakers.
If you want to use the 6200 as a pre, it does a good job at that too.
 
One of my favorite things about this hobby is getting to try **** for yourself. Hook up that PSA-2 or DC300 to the pre-outs of the MA6200 and try it for yourself. If you like it better at lower levels, this simply means that you prefer the sonic character of the amp to the internal one in the MA6200. However, I've owned a bunch of MA6200s - the amp section doesn't leave much to desire.
 
Back
Top Bottom