Model 3600 Power Switch

[ocdecio]

I got this 3600 in working condition (but in need of a recap). It came with a badly burned power switch which may have been caused by a short on one of the unswitched outputs (from the looks of it).

What switch could I use to replace it?

 

[Lavane]

This was recently posted.
https://audiokarma.org/forums/index...shbutton-power-switches.963370/#post-14875500

 

[ocdecio]

This was recently posted.
https://audiokarma.org/forums/index...shbutton-power-switches.963370/#post-14875500

Thank you!

 

[Lavane]

Thank you!

Looking at your equipment list I see a lot of what I had at one point along with others. You still need a 140 power amp.

 

[ocdecio]

Looking at your equipment list I see a lot of what I had at one point along with others. You still need a 140 power amp.

Waiting for a busted one LOL

 

[Coolhandjjl]

The power switch on my 3600 burnt out because I was an idiot and ran my 250M power amp off the switched outlet. Folks here said it would be alright . Anyway, I completely disassembled it, cleaned it up. I did have to steel wool the burnt areas on the contacts, so those surfaces may eventually oxidize over time.

The hardest part was getting it out.

 

[ocdecio]

Mine looks like a short on the unswitched outputs because one of them is fried too.

I ordered a switch let's see how it goes...

 

[Coolhandjjl]

Mine looks like a short on the unswitched outputs because one of them is fried too.

I ordered a switch let's see how it goes...

Keep us posted!

 

[ocdecio]

Keep us posted!

Will do! I am also waiting for a replacement relay (there is one installed and it seems to work but it isn't the original). I also got a new Marantz power cord, trying to get this unit as close as possible to the original.