• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

My Bottlehead Stereomour

shelby1420

Enjoying the music.....
I built this little beauty to go along with my newly built Cornscala's and this far, love it!!! As you can see I opted to scrap the Alder bases that came with the kit and went with some local Black Walnut, under the hood I have Solen--Fastcap: S3Q, S3ZG Series Teflon FEP Film & Tin Foil Cap in the coupling position and Mundorf Silver/Gold/Oil in the output position, true bliss!!!! I gotta say these Solens are absolutley stunning caps, I have tried V-Caps but never could "like" the sound(even after about 400 hours of break in time) but the Solens, ooh la la!!!! Right now just waiting for a set of RCA 2A3 Black plates to go along with the RCA 6201 Black plate already in there, all in all, I really like what I am hearing!!!
 

Attachments

  • 054.jpg
    054.jpg
    54.2 KB · Views: 219
  • 055.jpg
    055.jpg
    74.9 KB · Views: 253
Register to hide this ad
I like!

I've used the Solens in everything from my diy x-overs to having them installed in my Allen 75's to replace the existing coupling caps. Been more than pleased with the results :yes:

RC
 
Cornscala's to go along with it......

Thanks guys, I really like the sound stage of the 2A3, much more so then the 300B amps I had a while back.... few more pics of my speakers I built about 3 months ago.........a very nice combo!!
 

Attachments

  • 036.jpg
    036.jpg
    58.9 KB · Views: 79
  • 035.jpg
    035.jpg
    78.7 KB · Views: 152
Last edited:
Is that an actual Bottlehead product? Guess I should visit the site again one of these days...

I've reactivated my Paramours to drive the new 604E Duplexes in the living room.
 
That's what you get from a 2A3 :-)
THanks, I'll take a look.

One of my Paramours has an interesting little issue - it's either a cold solder joint :-P or a dirty hum pot. I get a little static-y buzz if the top plate is tapped. Spent about an hour troubleshooting it when I resurrected them a few weeks ago but didn't solve the problem. I could use the "Henny Youngman's Doctor" approach to curing the problem: "Don't tap on it!"... but unfortunately intense LF at high volumes will make the one amp "burp". The other one is perfectly fine.

Who needs more than 3.5W? Not me....
 
That's what you get from a 2A3 :-)
THanks, I'll take a look.

One of my Paramours has an interesting little issue - it's either a cold solder joint :-P or a dirty hum pot. I get a little static-y buzz if the top plate is tapped. Spent about an hour troubleshooting it when I resurrected them a few weeks ago but didn't solve the problem. I could use the "Henny Youngman's Doctor" approach to curing the problem: "Don't tap on it!"... but unfortunately intense LF at high volumes will make the one amp "burp". The other one is perfectly fine.

Who needs more than 3.5W? Not me....

Time to get the chopsticks out and start tappin under the hood, or post on the Bottlehead form ( excellent support) or better yet PM Grainger here on AK, wealth of info in regards to most things Bottlehead, specially the Paramours'............ 3.5w is more then enough with 101db speakers................
 
I built this little beauty to go along with my newly built Cornscala's and this far, love it!!! As you can see I opted to scrap the Alder bases that came with the kit and went with some local Black Walnut, under the hood I have Solen--Fastcap: S3Q, S3ZG Series Teflon FEP Film & Tin Foil Cap in the coupling position and Mundorf Silver/Gold/Oil in the output position, true bliss!!!! I gotta say these Solens are absolutley stunning caps, I have tried V-Caps but never could "like" the sound(even after about 400 hours of break in time) but the Solens, ooh la la!!!! Right now just waiting for a set of RCA 2A3 Black plates to go along with the RCA 6201 Black plate already in there, all in all, I really like what I am hearing!!!

Congrats, I like the walnut base!
 
wow, if that sounds half as good as it looks I'm green with envy :-)

Enjoy it! I'm sure part of the pleasure is knowing that you built it yourself.
 
How is the mid and low bass with these amps? Its well controlled? How deep do they drive the cornscalas? My thought is that there might be a problem with not having enough headroom for the K33? Tell me I am wrong because I have always wanted to build some bottleheads.
 
Back
Top Bottom