• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Nagaoka Thoughts?

But you have had some decent MC cartridges, haven't you Art? Perhaps that's where your perception of a cartridge like the MP-110 being muddy comes from. I'm sure it's a nice cartridge, but if you're used to higher resolution I guess it could be disappointing. I considered getting a 110 last year as a workhorse cartridge and now I'm glad I didn't.

Chad (poppachubby) loves his MP-200, and that is a cartridge I haven't ruled out getting in the future, though I still have doubts about whether my MC-loving brain would care for it in the end. I've always been impressed that the 200 has a boron cantilever at that price point.

Congrats to the OP, have fun!

The most expensive cartridge I've actually owned is the 10x5. When i was running the 110 I was comparing it to the 2M Blue which is what I had at the time.

I've listened at length to some fine setups with high end cartridges (think five figures) but never owned anything above the 10x5. The 110 and I just didn't get along. I'm sure that under the right circumstances it's a fine cartridge.
 
Is the screw mounting on the 300 and 500 not required when fitting to a 200 body? or is it held in place by friction maybe?

Friction, same way the MP200 (100, 110??) stylus is held in place. If you have never taken the MP200 stylus out it's quite surprising how easy it comes in and out.
btw: I asked Needle Doctor if I could use the MP500 stylus on the 200 and they said sure, it should sound great
 
Friction, same way the MP200 (100, 110??) stylus is held in place. If you have never taken the MP200 stylus out it's quite surprising how easy it comes in and out.
btw: I asked Needle Doctor if I could use the MP500 stylus on the 200 and they said sure, it should sound great

Correct, held in with friction, no screws for the needle. I am of this camp, buy a MP500 needle for my MP200 body......LPgear does have a tradeup policy on the MP300and MP500.....So you can get some credit for your MP110 towards either one...another option.

BTW....I have been spinning vinyl all day and this MP200 is amazing! The low end has come in place and is so tight, digs low and really gives that deep bone moving bass at times. Sound stage is pretty much wall to wall and deep

:music:
 
Hey guys,
I just received this mint, said to have only twenty five hours on it , MP15H.
So far I'm thoroughly impressed with every aspect of this cartridge. The smooth mid range and fast tight bass stand out. It is detailed with out etch or sounding bright the way I like. Tracking is very good too at 1.65 grams. What I'm most pleased with though is it's appearance, in which through photos, Nagaokas all ways looked cheesy to me and was a major turn off. The olive drab scheme , and plastic body with brass logo,are indeed of very high quality. I'm now a Nagaoka fan.I can only imagine how good the higher models are.
 

Attachments

  • IMG_5432.jpg
    IMG_5432.jpg
    25.5 KB · Views: 55
  • IMG_5433.jpg
    IMG_5433.jpg
    38.3 KB · Views: 45
  • IMG_5434.jpg
    IMG_5434.jpg
    29.9 KB · Views: 59
I was encouraged to try the Nagaoka cartridge as I was looking for more richness in the mid range and more detail with the bass.
Up until that point I had previously been using an Ortofon 2M Blue for about 2years. With the 2M Blue I liked the extra detail it was providing but I found it a little bright and not so good on less pristine vinyl.
I bought a used Nagaoka MP-11 Boron, it was immediately noticeable how it filled out the midrange and provided a lot more warmth to the bass. Instruments sounded so realistic, drum kits, kick, snare,toms and cymbals were so real. I really liked the way the MP-11 Boron worked with Jazz recordings, I was really getting a sense of the musicians working together, really hard to explain but it was as though I was listening to my records differently, witnessing a musical performance.
I have since moved up the Nagaoka range of cartridges and was fortunate to buy a used Nagaoka MP-50. To my ears the MP-50 retains the character of the MP-11 Boron but does everything that much better. Also both the MP-11 Boron and MP-50 had the benefit of reducing surface noise on a lot of used records allowing me to enjoy listening to them reducing the sound of pops and clicks.
Had I not found the MP-50 I would have continued happily with the MP-11 Boron and in time moved up to the MP-200.
 
Last edited:
Thread digger here. Still waiting on my black pearl to arrive and was doing a bit of research for a second cart for my less than perfect records and for stuff I find in second hand shops or flea pay. I was considering an at95e just because it's cheap and has quite a few fans however the Nagaoka mp100-110 really has my interest as almost every review I have read states how well they do with surface noise. I have a few LP's (who doesn't?) that are almost unlistenable except at low volumes. looks like Ill be getting either a 100 or 110 to start with then upgrade the stylus or cart (150-200) later on.
Any other thoughts on Nagaoka?
 
Any other thoughts on Nagaoka?

I've got the MP-110 and a Shure M97xE and tried out both on my Pioneer PL-630. After going back and forth between the two, the Shure, to my ears, just sounded better. It's still on it, while the Nagaoka sits in a drawer.

Your impressions may be completely different, as all those other factors come into play (speakers, receiver, room sonics, etc.)

Whatever the results, play and enjoy!

Jeff
 
Last edited:
Two thoughts. The Nagaoka MP-50 is probably my favorite cart, I'm not familiar with the MP-11x. A good record cleaning system is probably the best way to deal with noise, followed closely by stylus shape.
 
My friend who's opinion i trust just recently bought a Nagaoka MP200 he has owned a lot of cartridges, just to name a few
Ortofon 2 M Black Ortofon Vivo Blue, AT OC0MKII Goldring 1042 anyway that's just a few and he really loves it says so far and this is about 3 months of ownership that it's a keeper says it does just about everything rite plenty of detail, bass, nice mids, etc..................

Bought my Technics 1800MKII from Stanton. A few months ago I was questioning the performance of my Ortofon 2M Bronze and was trying out several of the higher end AT carts He voiced the same opinion as here, I bought the Nagaoka 200 and absolutely love it. Maybe has something to do with the boron cantilever; don't know but my Jico SAS has the boron cantilever and I love that too
 
Bought my Technics 1800MKII from Stanton. A few months ago I was questioning the performance of my Ortofon 2M Bronze and was trying out several of the higher end AT carts He voiced the same opinion as here, I bought the Nagaoka 200 and absolutely love it. Maybe has something to do with the boron cantilever; don't know but my Jico SAS has the boron cantilever and I love that too

That's the damn problem with this hobby. "I'd really like to buy model x, but for a little bit more I can get the much better model y and for just a little bit more than that I can get the even better model z," ad infinitum.

So I should get the 110- or 200 or the 500? Wife still says at95:thumbsdn:
 
tnmike1 said:
...my Jico SAS has the boron cantilever and I love that too
How do the Naga and SAS cantilevers compare visually? Any similarities?
 
Back
Top Bottom