Nakamichi part numbers for RX-202

[Huck]

Hi: I have the Nak part numbers for the three belts for my Nak RX-202, which are:
#OC80034 Capstan belt (X1)
#OCO8099 Cam Motor Belt (x1)
#OCO8099 Flip Transport Belt (x1)
I can't find the Nak part # for the idler tire and it does not show it in the pdf of the Service Manual?! This company has one here, but would rather go with all original Nak if possible! (Russell Industries#ST.536).
Does anyone have the Nak part# for the idler tire and can someone verify that this RX-202 in fact uses 3 belts or two!? Thanks, Huck

 

[terryfox3]

Where you want to go is ebay.There are replacement kits there.I got the marrs communications kit.It has a good rep.Do not get a generic drive belt though.It ups your wow and flutter.The marrs drive belt is supposed to be ok though.You can find stock nak drive belts though they are very expensive.

 

[Huck]

Where you want to go is ebay.There are replacement kits there.I got the marrs communications kit.It has a good rep.Do not get a generic drive belt though.It ups your wow and flutter.The marrs drive belt is supposed to be ok though.You can find stock nak drive belts though they are very expensive.

Thanks! That's why I want to go with the factory belts! I read about the W&F with the cheaper belts. For that kind of part, I don't want to go cheap!! Thanks, Huck

 

[Fred Longworth]

I agree. eBay. Marrs Communications. The guy takes putting together Nak belt/tire kits very seriously.

Fred

 

[Huck]

I agree. eBay. Marrs Communications. The guy takes putting together Nak belt/tire kits very seriously.

Fred

Thanks Fred: Do you know if the Nak RX-202 uses 3 belts or 2? I thought I read somewhere that it needs one Capstan belt and one each (same p/n) for the Cam motor belt and Flip transport belt?! Thanks, Huck:thmbsp: