• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Need advice - Large Advent Tweeter Look ok?

OP Music

Active Member
I am looking to get a tweeter for one of my Large Advents in which the tweeter is blown. I'm looking at a specific listing on eBay - http://www.ebay.com/itm/ONE-VINTAGE...f82f488:g:gc0AAOSwAuZX4YNi&autorefresh=truewe

Everything looks great, the only thing that is weirding me out is the orientation of the wood block holding the tweeter to the metal back. All the tweeters I've seen coming out of the Larger Advents have the offset orientation, where as this one is much more subtle. Is this something I should be worried about?

Thanks for your time guys.

Best Regards, Al
 
Register to hide this ad
Are you looking for a tweeter for an Original large Advent or a New Large Advent? The tweeters were slightly different. I agree that the tweeter in question looks odd. The rotational angle is off, and as mentioned, there is no black tape covering the wires. It looks like it was altered in some way.
 
Last edited:
Are you looking for a tweeter for an Original large Advent or a New Large Advent? The tweeters were slightly different. I agree that the tweeter in question looks odd.
Sorry I should have specified. I have old larger advents. The difference of the tweeters between old and new is pretty stark; this one is for the older style, I'm sure.
 
Sorry I should have specified. I have old larger advents. The difference of the tweeters between old and new is pretty stark; this one is for the older style, I'm sure.

I have one of each right in front of me. It resembles the OLA tweeter, but something is amiss.

By the way, links to ebay are only allowed in Dollars and Sense. Don't be surprised if this thread gets moved, unless you delete the link and only post the photo.
 
Last edited:
Yeah, I looked at all 4 my tweeters and they all have the same orientation, pieces of tape and metal contacts. I'm not sure what to think haha
 
Back
Top Bottom