Hopefully there is someone that can help with this. I’m trying to align an AM radio and from my understanding I’m supposed to use modulation to get a frequency (400hz in this case) to go on top of another (455khz which will be the carrier frequency).
I’m using a Juntek JDS-2900 generator which is a fairly popular 60 MHz generator. I set my main sinewave for 455 KHz
And then push “Mod” for modulation.
It allows me to choose sweep frequency where it wants me to choose start and stop frequencies, time, rise/fall direction, mode, and start/stop.
Or I can choose Pulse
Or I can choose burst
Playing with the sweep frequencies changes my main sinewave frequency to whatever the sweep is at.
I’m really hoping that someone is familiar enough with this series of signal generator that they could instruct me on putting a simple tone on top of a carrier frequency.
Dan
I’m using a Juntek JDS-2900 generator which is a fairly popular 60 MHz generator. I set my main sinewave for 455 KHz
And then push “Mod” for modulation.
It allows me to choose sweep frequency where it wants me to choose start and stop frequencies, time, rise/fall direction, mode, and start/stop.
Or I can choose Pulse
Or I can choose burst
Playing with the sweep frequencies changes my main sinewave frequency to whatever the sweep is at.
I’m really hoping that someone is familiar enough with this series of signal generator that they could instruct me on putting a simple tone on top of a carrier frequency.
Dan